Test
Test Designation | Test Description |
---|---|
AASHTO T 19M/T 19 | Bulk Density ("Unit Weight") and Voids in Aggregate |
AASHTO T 27 | Sieve Analysis of Fine and Coarse Aggregates |
AASHTO T 37 | Specific Gravity and Absorption of Fine Aggregate |
AASHTO T 84 | Specific Gravity and Absorption of Coarse Aggregate |
AASHTO T 85 | Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
AASHTO T 103 | Soundness of Aggregates by Freezing and Thawing |
AASHTO T 104 | Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate |
AASHTO T 112 | Clay Lumps and Friable Particles in Aggregate |
AASHTO T 176 | Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test |
AASHTO T 304 | Standard Method of Test for Uncompacted Void Content of Fine Aggregate |
AASHTO T 327 | Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
AASHTO TP 81 | Determining Aggregate Shape Properties by Means of Digital Image Analysis |
ASTM D4791 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
Test Designation | Test Description |
---|---|
AASHTO T 313 | Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) |
AASHTO T 315 | Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) |
AASHTO T 316 | Viscosity Determination of Asphalt Binder Using Rotational Viscometer |
AASHTO T 240 | Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) |
AASHTO T 350 | Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) |
AASHTO R 28 | Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) |
Test Designation | Test Description |
---|---|
AASHTO T 166 | Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens |
AASHTO T 167 | Compressive Strength of Hot Mix Asphalt |
AASHTO T 168 | Sampling Bituminous Paving Mixtures |
AASHTO T 209 | Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA) |
AASHTO T 246 | Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus |
AASHTO T 269 | Percent Air Voids in Compacted Dense and Open Asphalt Mixtures |
AASHTO T 283 | Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage |
AASHTO T 312 | Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor |
AASHTO T 321 | Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending |
AASHTO T 322 | Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device |
AASHTO T 324 | Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA) |
AASHTO T 342 | Determining Dynamic Modulus of Hot Mix Asphalt (HMA) |
AASHTO TP 79 | Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT) |
AASHTO TP 105 | Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB) |
AASHTO TP 107 | AASHTO TP 107-14 (2016) - Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests |
AASHTO TP 114 | Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers |
AASHTO TP 124 | Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature |
Test Designation | Test Description |
---|---|
AASHTO T 88 | Particle Size Analysis of Soils |
AASHTO T 89 | Determining the Liquid Limit of Soils |
AASHTO T 90 | Determining the Plastic Limit and Plasticity Index of Soils |
AASHTO T 99 | Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop |
AASHTO T 100 | Specific Gravity of Soils |
AASHTO T 176 | Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test |
AASHTO T 180 | Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop |
AASHTO T 191 | Density of Soil In-Place by the Sand-Cone Method |
AASHTO T 215 | Permeability of Granular Soils (Constant Head) |
AASHTO T 265 | Laboratory Determination of Moisture Content of Soils |
AASHTO T 307 | Determining the Resilient Modulus of Soils and Aggregate Materials |
AASHTO T 311 | Grain-Size Analysis of Granular Soil Materials |