Hanping Ding

Assistant Professor

Phone: (405) 325-4043
Office: Felgar Hall 219B
Office Hours: Monday 1:00pm-2:00pm
or by appointment
Website: https://sites.create.ou.edu/ding/

Education
Ph.D, Mechanical Engineering (2014)
University of South Carolina
M.S., Materials Science and Engineering (2009)
University of Science and Technology of China
B.S., Materials Science and Engineering
Jilin University, China

Research Focus

Hydrogen Production and related technologies (materials R&D, stack/modular demonstration)
Fuel Cells
Batteries
Electrocatalysis/membrane reactor/gas separation/high-temperature ceramics
Electrochemical Processing (natural gas direct conversion, CO2 electrochemical reduction, chemical synthesis)
Integrated Energy System
Additive Manufacturing
Solid state ionics
Computational Modeling

Experience and Awards

Materials Scientist/Engineer - Idaho National Laboratory (May 2019 to July 2022)
Postdoctoral Fellow - Energy and Environment S&T, Idaho National Laboratory (December 2017 to April 2019)
Postdoctoral Fellow - Department of Mechanical Engineering, Colorado School of Mines (September 2014 to November 2017)

Recent Publications

H. Ding, W. Wu, D. Ding, et al., “Self-Sustainable Protonic Ceramic Electrochemical Cells Using a Triple Conducting Electrode for Hydrogen and Power Production”, Nature Communications, 2020, doi.org/10.1038/s41467-020-15677-z.
H. Ding, W. Wu, D. Ding, “Advancement of Proton-Conducting Solid Oxide Fuel Cells and Solid Oxide Electrolysis Cells at Idaho National Laboratory (INL)”, ECS Transactions, 2019, doi.org/10.1149/09101.1029ecst
P. Zhu, L. Wang, F. Stewart, D. Ding, J. Matz, P. Dong, H. Ding*, “Direct conversion of natural gases in solid oxide cells: A mini-review”, Electrochemistry Communications, 128 (2021) 107068.
C. Y. Regalado Vera, H. Ding*, D. Peterson, W. T. Gibbons, M. Zhou, D. Ding, “A mini-review on proton conduction of BaZrO3-based perovskite electrolytes”, J. Phys. Energy 3 (2021) 032019.
H. Ding, S. Fang, Y. Yang, Y. Yang, W. Wu, Z. Tao, “High-Performing and Stable Electricity Generation by Ceramic Fuel Cells Operating in Dry Methane Over 1000 hours”, Journal of Power Sources, 401 (2018) 322-328.
H. Ding, et al. “Electricity Generation in Dry Methane by A Durable Ceramic Fuel Cell with High-Performing and Coking-Resistant Layered Perovskite Anode”, Applied Energy, 233 (2018) 322-328.
H. Ding, N. Sullivan, S. Ricote, “Double perovskite Ba2FeMoO6-δ as fuel electrode for protonic-ceramic membranes”, Solid State Ionics, 306 (2017) 97-103.
H. Ding, Z. Tao, Y. Liu, Y. Yang, “A redox-stable direct-methane solid oxide fuel cell (SOFC) with Sr2FeNb0.2Mo0.8O6−δ double perovskite as anode material”, Journal of Power Sources, 327 (2016) 573-579.
H. Ding, Z. Tao, S. Liu, Jiujun Zhang, “A High-Performing Sulfur-Tolerant and Redox-Stable Layered Perovskite Anode for Direct Hydrocarbon Solid Oxide Fuel Cells”, Scientific Reports, 2015, 5:18129, DOI: 10.1038/srep18129.
H. Ding, X. Xue, “An Interfacial Nanospike-Structured Cathode for Low Temperature Solid Oxide Fuel Cells”, Advanced Materials Interfaces, 1 (2014) 1400008, DOI: 10.1002/admi.201400008.
H. Ding, X. Xue, “A Platinum Nanowire Network as A Highly Efficient Current Collector for Intermediate Temperature Solid Oxide Fuel Cells”, RSC Advances, 4 (2014) 11317.
H. Ding, B. Lin, X. Liu, G. Meng, “Low-Temperature Protonic Ceramic Membrane Fuel Cells (PCMFCs) with SrCo0.9Sb0.1O3-δ Cubic Perovskite Cathode”, Journal of Power Sources, 185 (2008) 937-940.
H. Ding, B. Lin, X. Liu, G. Meng, “High Performance Protonic Ceramic Membrane Fuel Cells (PCMFCs) with Ba0.5Sr0.5Zn0.2Fe0.8O3-δ Perovskite Cathode”, Electrochemistry Communications, 10 (2008) 1388-1391.