ACTIVITY_ID - The unique identifier for an activity performed at or related to a particular site. DAYS_LATE - The system-generated number of days the DMR value is late. DMR_EVENT_ID - The sequence ID identifying the DMR Event. DMR_FORM_VALUE_ID - The sequence ID identifying the DMR Form Value. "DMR_FREQ_OF_ANALYSIS_CODE - The code identifying the frequency measure used for sampling the data; this is the Frequency of Analysis reported for a DMR parameter on the DMR form. For a list of all codes and descriptions, download the Frequency of Analysis Reference Table (CSV) (4.8 K)." "DMR_SAMPLE_TYPE_CODE - The sampling method used to provide the values for the DMR parameter on the DMR form. For a list of all codes and descriptions, download the Sample Type Reference Table (CSV) (1.7 K)." DMR_UNIT_CODE - The code representing the unit of measure applicable to quantity or concentration limits and measurements as entered by the user. DMR_UNIT_DESC - The short description of the unit of measure applicable to limit or DMR values. DMR_VALUE_ID - The system-generated unique identifier for the DMR value. DMR_VALUE_NMBR - The DMR value number reported on the DMR form. "DMR_VALUE_QUALIFIER_CODE - The unique code identifying the DMR value operator (e.g., <, T, >, E, =)." DMR_VALUE_STANDARD_UNITS - The DMR value expressed in standard units as calculated by the system. EXCEEDENCE_PCT - The system-generated percent by which the DMR value (or Adjusted Value) exceeded its Limit (or stay) value. EXTERNAL_PERMIT_NMBR - The unique identifier for a permit. LIMIT_BEGIN_DATE - The date on which a limit starts being in effect for a particular parameter in a limit set. LIMIT_END_DATE - The date on which a limit stops being in effect for a particular parameter in a limit set. LIMIT_ID - The unique identifier for a limit parameter record. "LIMIT_FREQ_OF_ANALYSIS_CODE - The frequency with which the permittee must analyze the sampled data. The general format is XX/YY, where XX=number of times sampled and YY=Period of time sampled. For a list of all codes and descriptions, download the Frequency of Analysis Reference Table (CSV) (4.8 K)." "Note: When opening the file in Excel, values may display as dates due to the formatting (E.g., ""01/30"" describes monthly frequency sampling, but may display in Excel as ""30-Jan"".)" "LIMIT_SAMPLE_TYPE_CODE - The sampling method required by the permit to be used to provide values on the DMR for the limit. For a list of all codes and descriptions, download the Sample Type Reference Table (CSV) (1.7 K)." LIMIT_SET_DESIGNATOR - The alphanumeric field that is used to designate a particular grouping of parameters within a limit set. LIMIT_SET_ID - The system-generated unique identifier for a limit set. LIMIT_SET_SCHEDULE_ID - The system-generated unique identifier of the Limit Set Schedule. LIMIT_UNIT_CODE - The code representing the unit of measure applicable to quantity or concentration limits and measurements as entered by the user. LIMIT_UNIT_DESC - The short description of the unit of measure applicable to limit or DMR values. LIMIT_VALUE_ID - The system-generated unique identifier for the Limit Value. LIMIT_VALUE_NMBR - The actual limit value number from the Permit or Enforcement Action Final Order. "LIMIT_VALUE_QUALIFIER_CODE - The unique code identifying the limit value operator (e.g., <, T, >, E, =)." LIMIT_VALUE_STANDARD_UNITS - The limit value expressed in standard units as calculated by the system. "LIMIT_VALUE_TYPE_CODE - The indication of the limit value type (e.g., Quantity 1, Concentration 2)." MONITORING_LOCATION_CODE - The code that the monitoring location at which the monitoring requirement (and effluent limit if limited) applies. One parameter may have several monitoring location requirements pertaining to the same permitted feature. Valid code values are: Code Description 0 Intake 1 Effluent Gross 2 Effluent Net 3 Intake Public Water 4 "Pretreatment, Process Complete" 5 Upstream Monitoring 6 Downstream Monitoring 7 Intake from Stream 8 "Other Treatment, Process Complete" 9 "Phosphate Removal, Process Complete" A "Disinfection, Process Complete" AP Alternate Process B Prior to Disinfection C "Nitrogen, Removal Complete" D Tertiary/Advanced Process Complete E Secondary/Biological Process Complete EG Effluent Gross F Primary/Preliminary Process Complete G Raw Sewage Influent H During Manufacturing I Intake from Well IN Allowed Increase J "Intermediate Treatment, Process Complete" K Percent Removal L Digestor N In Aeration Unit O See Comments P See Comments Q See Comments R See Comments RS Beneficial Reuse RW Receiving Water S See Comments SC See Comments SL Sludge T See Comments U See Comments V See Comments W See Comments X End of Chlorine Contact Chamber Z Instream Monitoring Y Effluent Gross (Supplementary) GW Groundwater II Industrial Influent IM Internal Monitoring Point PI Prior to Irrigation PR Prior to Reuse LA Land Application Soil MONITORING_PERIOD_END_DATE - The date that the monitoring period for the values covered by this DMR form ends. "NMBR_OF_SUBMISSION - The attribute stores the number of months for submitting the DMRs for the limit set (e.g., monthly = 1, semi-annually = 6, quarterly = 3); this data element will be blank for Unscheduled Limit Sets." "NMBR_OF_REPORT - The number of months in the monitoring period covered by the DMR (e.g., monthly = 1, quarterly = 3, semi-annually = 6)." NODI_CODE - The no data indicator (NODI) code indicates the reason that data for an expected DMR value were not submitted by the permittee for a Monitoring Period End Date. Code Description 1 Wrong Flow 2 Operation Shutdown 3 Special Report Attached 4 Discharge to Lagoon/Groundwater 5 Frozen Conditions 7 No Influent 8 Other (See Comments) 9 Conditional Monitoring - Not Required This Period A General Permit Exemption B Below Detection Limit/No Detection C No Discharge D Lost Sample/Data Not Available E Analysis Not Conducted/No Sample F Insufficient Flow for Sampling G Sampling Equipment Failure H Invalid Test I Land Applied J Recycled - Water-Closed System K Natural Disaster L DMR Received but not Entered R Administratively Resolved S Fire Conditions V Weather Related W Dry Lysimeter/Well Q Not Quantifiable X Parameter/Value Not Reported M Laboratory Error N Not Constructed NPDES_VIOLATION_ID - The system-generated unique identifier for the NPDES Violation. "OPTIONAL_MONITORING_FLAG - The flag allowing users to indicate that monitoring is optional but not required (i.e., effluent violation generation will be suppressed for optional columns)." PARAMETER_CODE - The unique code identifying the parameter being limited and/or monitored. PARAMETER_DESC - The description of the parameter code. PERM_FEATURE_ID - The unique system identifier of a permitted feature. PERM_FEATURE_NMBR - The identifier assigned for each location at which permit conditions are being applied. "PERM_FEATURE_TYPE_CODE - The code indicating the type of permitted feature (e.g., External Outfall, Sum). Valid code values are:" Code Description ARW Receiving Water (Ambient) CDS Co-disposal Site DOF Discharge to Offsite Facility EXO External Outfall INC Incinerator INF Influent Structure INO Internal Outfall INS Intake Structure LAS Land Application Site MOD Mobile Offshore Drilling Unit (MODU) OTR Other PLA Platform SDS Surface Disposal Site SUB Subsea SUM Sum WEL Monitoring Well "REPORTED_EXCURSION_NMBR - The number of times a limit was exceeded, as reported on the DMR form." RNC_DETECTION_CODE - The code indicating the reportable noncompliance (RNC) detected for a violation. Valid code values are: Code Description A Enforcement Order B Manual 2A4 - Pass-Through C Chronic Violation D Manual Other E Manual 2F - Permit Narrative F Manual 2G - Violation of Concern G Manual 2A1 - Effluent Violation H "Chronic Violation, Non-Monthly Average" I Manual 2A2 - Unauthorized Bypass J Manual 2A3 - Unpermitted Discharge K "Non-receipt Violation, Non-Monthly Average" N Non-Receipt of DMR/Schedule Report P "Enforcement Order, Non-Monthly Average" Q Manual 2B - Pretreatment R "TRC Limitations Exceeded, Non-Monthly Average" S Schedule Violation T TRC Limitations Exceeded U Other Violation with TRC Non-Monthly Average V Other Violation with TRC W Manual 2E - Deficient Report X Manual Other Violation with TRC Y Manual TRC Z Manual Chronic "RNC_DETECTION_DATE - The date that RNC was detected. It can be entered manually or automatically. In cases in which RNC is detected by ICIS-NPDES, the detection date entered will vary according to the type of violation detected." RNC_RESOLUTION_CODE - The code indicating the resolution of noncompliance (RNC) for a violation. Valid code values are: Code Description A NC - Manual Unresolved RNC B RE - Manual by EPA/State/Tribal Action 1 NC - Unresolved RNC 2 RE - Back into Compliance 3 RP - Due to Formal Enforcement Action Final Order with Compliance Schedule 4 RP - In Compliance with Formal Enforcement Action Final Order Requirement 5 RE - Resolved RP by NPDES Closure of Enforcement Action Final Order with Compliance Schedule 6 RE - Manual Resolution by Enforcement Action 7 RP - Manual RP - In Compliance with Formal Enforcement Action Order Requirement 8 RP - Manual Due to Formal Enforcement Action Formal Order 9 RE - Manual by Back into Compliance RNC_RESOLUTION_DATE - The date RNC was marked to its current resolution status. It can be entered manually or automatically. STANDARD_UNIT_DESC - The short description of the standard unit of measure applicable to limit or DMR values. "STATISTICAL_BASE_CODE - The code representing the unit of measure applicable to the limit and DMR values entered by the user (e.g., 30-day average, daily maximum). For a list of all codes and descriptions, download the Statistical Base Code Reference Table (CSV) (10 K)." "STATISTICAL_BASE_TYPE_CODE - The code indicating whether the statistical base code is a minimum, average, or maximum for purposes of calculating compliance against the limit value. For a list of all codes and descriptions, download the Statistical Base Code Reference Table (CSV) (10 K)." "STAY_TYPE_CODE - The unique identifier of the type of stay applied to a limit (e.g., X, Y, Z), which indicates whether the limits do not appear on the DMR at all, are treated as monitor only, or have a stay value in effect during the period of the stay." STANDARD_UNIT_CODE - The code representing the standard unit of measure applicable to quantity or concentration limits and measurements as entered by the user. "STAY_VALUE_NMBR - The numeric limit value imposed during the period of the stay for the limit; if entered, during the stay period, the system will use this limit value for calculating compliance rather than the actual limit value." "VALUE_TYPE_CODE - The indication of the limit value type (e.g., Quantity 1, Concentration 2)." VALUE_RECEIVED_DATE - The date the DMR value was received by the regulatory authority. VERSION_NMBR - The version of the permit when a modification or reissuance is applied to the permit. "VIOLATION_CODE - The code identifying which type of violation has occurred (e.g., D80 = Required Monitoring DMR Value Non-Receipt, E90 = Effluent Violation, C20 = Schedule Event Achieved Late)."