Declare a Need
If you represent an organization responding to Covid-19 pandemic relief efforts and are in need of the products and PPE we are designing, let us know on the form linked below.
Our OU Health Sciences Center Library teams are tracking declared needs across the state to help better prepare for this and other crises.
Community Needs & Donation Information
| ORGANIZATION | NEED | Last Updated |
| State of Oklahoma | Bulk PPE | April 13, 2020 |
| State of Oklahoma | Equipment | April 13, 2020 |
| OSU Health & Safety | PPE | April 13, 2020 |
| OU Medicine | PPE | April 13, 2020 |
| Integris | PPE | April 13, 2020 |
Manufacturing & 3D Printing Efforts
| ORGANIZATION | FOCUS |
| NIH 3D Print Exchange | 3D Models - Masks & Respirators |
| America Makes | 3D Printing / Rapid Manufacturing |
| FDA 3D Printing | Information & Resources |
| VHA 3D Printing Network | Data & Production Coordination |
Disclaimer:
The Board of Regents of the University of Oklahoma (“University”) makes no representation or warranty of any kind with respect to the 3D printing design for a “3D Printed Face Shield” (“Design”), whether express or implied, including any representation or warranty relating to the compliance of any 3D printed part based on such Design with any specific regulation, any warranty of merchantability, fitness for a particular purpose, or non-infringement of any patent or other proprietary right.
The Design should not be considered Personal Protective Equipment or “PPE” because its capability to provide protection is unknown. Caution should be exercised when considering the use of the Design. The Design is not intended to be a suitable replacement for N-95 or other surgical masks for healthcare workers, nor does it eliminate the risk of contracting or exposure of others to any disease or infection. The Design and manufacturing of this “3D Printed Face Shield” is not regulated by the U.S. Food & Drug Administration or the U.S. Centers for Disease Control and Prevention (CDC), nor has it been evaluated or approved by The National Institute for Occupational Safety and Health (NIOSH) or any other regulatory authority.
The individual, group, organization, or any other entity downloading the Design (“User”) acknowledges that User downloads and uses the Design at User’s own free will and own initiative and is aware that there are certain risks associated with using the 3D printed parts based on such Design, including but not limited to, injury to the body,general health, and well-being, death, and/or property damage. User hereby voluntarily assumes all risks associatedwith downloading and using the Design, including the suitability and compliance with any applicable regulations.
The University shall not be liable for any claims, demands, damages or injuries, including but not limited to, property damage, bodily injury, death, indirect, special or consequential damages, arising out of or in connection with User’s downloading, manufacture, commercialization, and any other use of the Design.
