Skip Navigation

Publications

Skip Side Navigation
Gallogly College of Engineering / Civil Engineering and Environmental Science / Research / Pavement Materials and Systems Group / Publications

Publications

 

Refereed Journal Publications

  1. Diab, A., You, Z., Hossain, Z., and Zaman, M. (2015). “Moisture Susceptibility Evaluation of Nano-sized Hydrated Lime-Modified Asphalt-Aggregate Systems Based on Surface Free Energy Concept,” Journal Transportation Research Board, Volume 2446, pp. 52–59.
  2. Ghabchi, R., Singh, D., and Zaman, M. (2015). “Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage, and fatigue performance of WMA mixes,” Journal of Road Materials and Pavement Design, Vol. 16, No. 2, pp. 334-357.
  3. Ghabchi, R., Singh, D., Zaman, M., and Hossain, Z., (2015). “Laboratory Characterization of Asphalt Mixes Containing RAP and RAS,” International Journal of Pavement Engineering, DOI: 10.1080/10298436.2015.1022778 (Available Online), pp. 1-18.
  4. Hossain, N., Singh, D. and Zaman, M. (2014). “Development of Rut Prediction Models from an Instrumented In-Service Test Section on Interstate-35,” Int. J. of Pavement Research and Tech., Vol. 8, No. 5, pp. 305-314.
  5. Hossain, Z., Zaman, M. and Doisron, C. (2015). “Regression Modeling of Resilient Modulus of Unbound Aggregates.” J. of Marine Science and Technology, Vol. 23, No. 3, pp. 388-398.
  6. Hossain, Z., Zaman, M., Hawa, T., Saha, M. (2015). “Evaluation of Moisture Susceptibility of Nanoclay-Modified Asphalt Binders through the Surface Science Approach,” Journal of Materials in Civil Engineering, Volume 27, Issue 10. pp. 10-18.
  7. Hossain, Z., Ghosh, D., and Zaman, M. (2015). “Implementation of the Multiple Stress Creep Recovery (MSCR) Test Method to Characterize Polymer-Modified Asphalt Binders for Oklahoma Conditions,” ASTM J. of Testing & Eval. (JTE), 44.1S (2015), pp. 1-14.
  8. Phusing, D., Suzuki, K., and Zaman, M. (2015). “Mechanical Behavior of Granular Materials under Continuously Varying b Values Using DEM.” Int. J. Geomechanics, ASCE, 10.1061/(ASCE)GM.1943-5622.0000506, 04015027.
  9. Singh, D.V., Beainy, F., Commuri, S., and Zaman, M. (2015). “Application of Intelligent Compaction Technology for Estimation of Effective Modulus for a Multilayered Asphalt Pavement,” ASTM Journal of Testing and Evaluation, Vol. 43, Issue 2, pp. 1-11.
  10. Solanki, P., Zaman, M., Adje, D., and Hossain, Z. (2015). ”Effect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot-Mix Asphalt.” Int. J. Geomechanics, ASCE, 15(5), A4014001.
  11. Yalcin, E., Gurocak, Z., Ghabchi, R., and Zaman, M. (2015). “Numerical Analysis for a Realistic Support Design – A Case Study: Komurhan Tunnel (Elazig/Eastern Turkey),” Int. J. of Geomechanics, ASCE, DOI: 10.1061/(ASCE)GM.1943-5622.0000564.
  12. Taghichian, A., Zaman, M. and Davegowda, D. (2014). “Stress Shadow Size and Aperture of Hydraulic Fractures in Unconventional Shales.” Petroleum Science and Engineering J., 124, pp. 209-221.
  13. Solanki, P., and Zaman, M. (2014) “Behavior of Stabilized Subgrade Soils Under Indirect Tension and Flexure,” of Materials in Civil Engineering, ASCE, 26(5), pp. 833-844.
  14. Solanki, P., Zaman, M., Adje, D., and Hossain, Z. “Effect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot-Mix Asphalt,” International J. of Geomechanics, ASCE, 10.1061/(ASCE)GM.1943-5622.0000398 , A4014001.
  15. Hossain, Z., Zaman, M., and Doiron, C. (2014). “Regression Modeling of Resilient Modulus of Unbound Aggregates,” 29 pages, International Journal of Marine Science and Technology (JMST), Vol. 19, No. 2 (29 pages).
  16. Ghabchi, R., Singh, D., Zaman, M., and Hossain, Z. (2014). “Micro-Structural Analysis of Moisture-Induced Damage Potential of Asphalt Mixes Containing RAP,” ASTM, Journal of Testing and Evaluation, 44, No. 1.
  17. Ghabchi, R., Singh, D., and Zaman, M. (2014). “Evaluation of Moisture Susceptibility of Asphalt Mixes Containing RAP and Different Types of Aggregates and Asphalt Binders Using the Surface Free Energy Method,” of Const. & Build. Mat., Vol. 73, pp. 479-489.
  18. Ghabchi, R., Zaman, M., Kazmee H., and Singh, D. (2014). “Effect of Shape Parameters and Gradation on Laboratory Measured Permeability of Aggregate Bases,” International Journal of Geomechanics, 10.1061/(ASCE)GM.1943-5622.0000397.
  19. Beainy, F., Commuri, S., and Zaman, M. (2014). A Visco-elastic-plastic Model of Asphalt/Roller Interaction During Field Compaction,” of Eng. Mechanics, ASCE, Vol. 140, Issue 7, pp. 1-12, http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000730.
  20. Beainy, F., Singh, D.V., Commuri, S., Zaman, M. (2014). “Achievable Quality During the Compaction of Asphalt Pavement,” International Journal of Pavement Research and Technology (IJPRT), Vol. 7, Issue 5, pp. 317-323.
  21. Solanki, P., Zaman, M., Adje, D., and Hossain, Z. (2013) “Field Construction and Mechanistic Performance of Hot Mix Asphalt Containing Reclaimed Asphalt Pavement,” J. of Pavement Research and Tech., Vol. 6, No. 4, pp. 403-413.
  22. Singh, D., Zaman, M. and Commuri, S. (2013), “Artificial Neural Network Modeling for Dynamic Modulus of Hot Mix Asphalt Using Aggregate Shape Properties.” Materials in Civil Engineering, Vol. 25, No. 1, pp. 54-62.
  23. Singh, D., Zaman, M. and Commuri, S. (2013), “Effects of Production and Sample Preparation Methods on Aggregate Shape Parameters,” J. of Pavement Engineering, Vol 14, No. 2, pp. 154-175.
  24. Hossain, Z., Lewis, S., Zaman, M., Buddhala, A., and O’Rear, E. (2013). ”Evaluation for Warm-Mix Additive-Modified Asphalt Binders Using Spectroscopy Techniques.” J. Materials in Civil Engineering, ASCE, Vol. 25, No. 2, pp. 149–159.
  25. Hossain, Z. and Zaman, M. (2013), “Behavior of Selected Warm Mix Asphalt Additive Modified Binders and Prediction of Dynamic Modulus of the Mixes,” ASTM J. of Testing and Eval., DOI: 10.1520/JTE104639; Vol. 41, No. 1 (12 pages).
  26. Hatami, K., Mahmood, T., Ghabchi, R., and Zaman, M. (2013), “Influence of In-Isolation Properties of Geogrid on Their Pullout Properties in a Dense Graded Aggregate,” Indian Geotech. Journal, Vol. 43, No. 4, pp. 303-320.
  27. Ghabchi, R., Singh, D., Zaman, M. and Tian, Q. (2013), “Mechanistic Evaluation of Effect of WMA-Additives on Wettability and Moisture Susceptibility Properties of Asphalt Mixes.” Journal of Testing and Evaluation, Vol. 41, No. 6, 2013, pp. 1-10.
  28. Beainy, F., Commuri, S., Zaman, M., and Syed, I. (2013), “Visco-Elastic-Plastic Model of Asphalt-Roller Interaction”. J. Geomechanics, ASCE, doi: 10.1061/(ASCE)GM.1943-5622.0000240.
  29. Budhala, A., Hossain, Z., Wasiuddin, N. M., Zaman, M., and O’Rear, E. A. “Susceptibility of Asphalt Binder with Warm Mix Additives to Moisture Induced Damage by Surface Free Energy Analysis,” ASTM Journal of Testing and Evaluation, Volume 40, Issue 1, January 2012.
  30. Hossain, Z., Solanki, P., Zaman, M., Lewis, S., and Hobson, K. “Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement,” Journal of ASTM International (JAI), Vol. 9, Issue 3, February 2012.
  31. Hossain, Z., and Zaman, M., “Sensitivity of Oklahoma Binders on Dynamic Modulus of Asphalt Mixes and Distress Functions,” Journal of Materials in Civil Engineering, Volume 24, No. 8, August, 2012.
  32. Singh, D.V., Zaman, M., and Commuri, S. (2012). “Evaluation of Dynamic Modulus of Modified and Unmodified Asphalt Mixes for Different Input Levels of the MEPDG,” International Journal of Pavement Research and Technology (IJPRT), Vol.5, Issue: 1, pp. 1-11.
  33. Singh, D.V., Zaman, M., and Commuri, S. (2012). “A Laboratory Investigation into the Effect of Long-Term Oven Aging on RAP Mixes Using Dynamic Modulus Test,” International Journal of Pavement Research and Technology (IJPRT), Vol.5, Issue: 3, pp. 142-152.
  34. Singh, D.V., Zaman, M., and Commuri, S. (2012). “Comparison of Shape Parameters for Selected Coarse Aggregates in Oklahoma,” ASTM Journal of Testing and Evaluation, Vol. 40, Issue: 3, pp. 409-426.
  35. Singh, D.V., Zaman, M., and Commuri, S. (2012). “Inclusion of Aggregate Angularity, Texture, and Form in Estimating Dynamic Modulus of Asphalt Mixes,” International Journal of Road Materials and Pavement Design (RMPD), Vol. 13, Issue: 2, pp. 327-344.
  36. Singh, D.V., Zaman, M., and White, L.(2012) “Neural Network Modeling of 85th Percentile Speed for Two-Lane Rural Highways,” Transportation Research Record: Journal of the Transportation Research Board (TRB), Vol. 2301, pp.17-27.
  37. Khalife, R., Solanki, P., and Zaman, M. (2012), “Evaluation of Durability of Stabilized Clay Specimens Using Different Laboratory Procedures,” ASTM Journal of Testing and Evaluation, 40(3), pp. 363-375.
  38. Solanki, P., Zaman, M. M., and Chin, M. (2012), “A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete,” ASTM Advances in Civil Engineering Materials, 1(1), pp. 1-20.
  39. Gurocak, Z., Solanki, P., Alemdag, S. and Zaman, M. M. (2012), “New Considerations for Empirical Estimation of Tensile Strength of Rocks,” Engineering Geology, 145-146, pp. 1-8.
  40. Ghabchi, R., Zaman, M., Khoury, N., Kazmee, H., and Solanki, P. (2012), “Effect of Gradation and Source Properties on Stability and Drainability of Aggregate Bases: A Laboratory and Field Study,” International Journal of Pavement Engineering, 13(6), pp. 1-17.
  41. Hossain, Z., Zaman, M., Wasiuddin, N.M., Sneed, J. and O’Rear, E., “Rheological Evaluation of Warm Mix and Anti-stripping Additives Modified Performance Grade Binders.” Road Materials and Pavement Design, Vol 12, No. 4, 2011, pp. 875-895.
  42. Hossain, Z. and Zaman, M., “Sensitivity of Oklahoma Binders on Dynamic Modulus of Asphalt Mixes and Distress Functions.” Journal of Materials in Civil Engineering, ASCE, DOI:10.1061/(ASCE)MT.1943-5533.0000461, Dec. 2011.
  43. Singh, D., Zaman, M. and Commuri, S., “Evaluation of Measured and Estimated Dynamic Modulus for Selected Asphalt Mixes.” Journal of ASTM International, DOI: 10.1520/JAI103535, Vol. 8, Issue 9, 2011, 19 pages.
  44. Hossain, Z., Solanki, P., Zaman, M., Lewis, S., and Hobson, K., “Influence of Recovery Processes on Properties of Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement.” Journal of ASTM International, DOI: 10.1520/JAI103679, Sept. 2011, 18 pages.
  45. Pittenger, D., Gransberg, D., Zaman, M. and Reimer, C., “Life Cycle Cost-Based Pavement Preservation Treatment Design.” Journal of Transportation Research Board, No. 2235, DOI: 10-3141/2235-04, 2011, pp. 28-35.
  46. Solanki, P., Zaman, M. and Muraleetharan, K., “Validation of Back-Calculated Modulus Values from Falling Weight Deflectometer Through Instrumentation on I-35.” Journal of Transportation Research Board, No. 2227, DOI: 10-3141/2227-09, 2011, pp. 79-86.
  47. Gupta, A., Zaman, M., Laguros, J.G. and Ghabchi, R., “Effect of Cement Kiln Dust and Rock Dust as Mineral Fillers on Bulk Specific Gravity of Fine Aggregates.” ASTM Journal of Testing and Evaluation, DOI: 10.1520/JTE103255, April 2011, 9 pages.
  48. Singh, D.V., Zaman, M. and Commuri, S., “Effect of Production and Sample Preparation Methods on Aggregate Shape Parameters.” International J. of Pavement Engineering, DOI: 10.1080/10298436.2011.635792, Nov. 2011, 22 pages.
  49. Hossain, Z., Zaman, M., O’Rear, E.A. and Chen, D.H., “Effectiveness of Water-Bearing and Anti-stripping Additives in Warm Mix Asphalt Technology.” International J. of Pavement Engineering, DOI: 10.1080/10298436.2011.616588, Sept. 2011, 9 pages.
  50. Hossain, Z., Zaman, M., Doiron, C., and Solanki, P., “Evaluation of Mechanistic-Empirical Design Guide Input Parameters for Resilient Modulus of Subgrade Soils in Oklahoma.” ASTM J. of Testing and Evaluation (JTE), Vol. 39, No. 5, DOI: 10.1520/JTE103603, 2011, 12 pages.
  51. Singh, D., Zaman, M. and Commuri, S., “Evaluation of Predictive Models for Estimating Dynamic Modulus of Hot Mix Asphalt Mixes Used in Oklahoma.” Journal of the Transportation Research Board, No. 2210, Vol. 4, 2011, pp. 57-72.
  52. Singh, D., Mai, A.T., Beainy, F.N., Commuri, S. and Zaman, M., “In-Situ Assessment of Stiffness During Construction of an Asphalt Pavement.” International J. of Pavement Research and Technology, Vol. 4, No. 3, 2011, pp. 131-139.
  53. Wasiuddin, N.M., Zaman, M. and Tarefder, R.A., “Use of Chat-Asphalt as a Paving Material: Field Performance Assessment.” International J. of Pavement Research and Technology, Vol. 4, No. 2, 2011, pp. 71-79.
  54. “Use of Raw Chat in HMA Surface: Environmental and Engineering Characterization” (Wasiuddin, N.m., Hamid, W.B., Zaman, M. and Nairn, R.W.). Accepted for publication in Journal of Solid Waste Tech. and Waste Management, June 2009.
  55. “Calibration of Non-Nuclear PQI Gauges and Field Comparison of PQI and Nuclear Gauge Densities” (Wasiuddin, N.M., Zaman, M. and Commuri, S.). Accepted for publication in Int. J. of Pavement Research and Tech., June 2009.
  56. “Effects of Lime and Cement Kiln Dust on the Performance of Lean Clays” (Solanki, P. and Zaman, M.). International J. of Geotechnical Engineering (in press), June 2009.
  57. “Calibration Procedures for the Intelligent Asphalt Compaction Analyzer” (Commuri, S., Mai, A. and Zaman, M.). ASTM Journal of Testing and Evaluation (in press), June 2009.
  58. “Properties and Moisture Susceptibility of Silty Clay Stabilized with Lime, Class C Fly Ash and Cement Kiln Dust” (Solanki, P., Khoury, N. and Zaman). J. of Materials in Civil Eng., ASCE (in press), June 2009.
  59. “Variations of Resilient Modulus of Subgrade Soils with Post-Compaction Moisture Contents” (Khoury, N.K., Zaman, M. and Brooks, R.M.). J. of Transportation Research Board (in press), June 2009.
  60. “Evaluation of Resilient Moduli of Pavement Layers at an Instrumented Section on I-35 in Oklahoma” (Solanki, P., Zaman, M., Muraleetharan, K. and Timm, D.). International J. Road Materials and Pavement Design (in press), June 2009.
  61. “Neural Network-Based Intelligent Compaction Analyzer for Estimating Compaction Quality of Hot Asphalt Mixes” (Commuri, S., Mai, A.T., and Zaman, M.). J. of Construction Engineering and Management, ASCE (in press), June 2009.
  62. “Finite Element Modeling of Cementitiously Stabilized Unnotched Beams Using a Smeared Fracture Approach” (M. Zaman, N. Khoury, and P. Solanki). International J. of Geomech., ASCE, Vol. 9, No. 1, 2009, pp. 34-42.
  63. “Development and Validation of “Smart Dust” for Pavement Condition Monitoring.” (Pei, J.S., Ivey, R.A., Lin, H., Landram, A.R., Sandburg, C.J., Ferzli, N.A., King, T., Zaman, M. and Refai, H.). J. of Intelligent Material Systems and Structures, Vol. 20, 2009, pp. 63-85.
  64. “Statistical Models for Determination of the Resilient modulus of Subgrade Soils” (P. Solanki, A. Ebrahimi and M. Zaman). Int. Jo. of Pavement Research and Tech., Vol. 1, No. 3, 2008, pp. 85-93.
  65. “Rock Slope Stability and Excavability Assessment of Rocks at the Kapikaya Dam Site, Turkey” (Gurocak, Z., Alemdag, S. and Zaman, M.). Engineering Geology, Vol. 96, 2008, pp. 17-27.
  66. “Estimation of Bearing Capacity of Basalts at Atasu Dam Site, Turkey” (S. Alemdag, Z. Gurocak, P. Solanki, and M. Zaman). Bulletin of Eng. Geology and The Environment, Vol. 67, No. 1, 2008, pp. 79-85.
  67. “Effect of Sasobit® and Aspha-Min® on Wettability and Adhesion between Asphalt Binders and Aggregates” (N. Wasiuddin, M. Zaman and E.A. O’Rear). Transportation Research Record, J. of the Transportation Research Board, 2051, 2008, pp. 80-89.
  68. “A Neural Network-Based Compaction Analyzer for Density Measurement During the Construction of an Asphalt Pavement” (S. Commuri, M. Zaman and J.N. Gonzalez). International Journal of Pavement Engineering, Vol. 9, Issue 3, June 2008, pp. 177-188.
  69. “Influences of Various Cementitious Agents on the Performance of Stabilized Aggregate Base Subjected to Wet-Dry Cycles” (N. Khoury and M. Zaman). Int. J. of Pavement Eng., Vol. 8, No. 4, 2007, pp. 265-276.
  70. “A Laboratory Evaluation of Unmodified and Polymer Modified Performance-Grade Binders with Anti-Stripping Additives” (S. Selvamohan, M. Zaman and J.G. Laguros). Journal of Engineering, Computing and Architecture, SJI, Vol. 1, Issue 2, 2007, pp. 1-11.
  71. “Empirical and Numerical Analyzes of Support Requirements for a Diversion Tunnel at the Boztepe Dam Site, Eastern Turkey” (Z. Gurocak, P. Solanki, and M. Zaman). Engineering Geology, Vol. 91, 2007, pp. 194-208.
  72. “Effect of Anti-Strip Additives on Surface Free Energy Characteristics of Asphalt Binders for Moisture-Induced Damage Potential” (N. Wasiuddin, C.M. Fogle, M. Zaman, and E.A. O’Rear). ASTM J. of Testing and Evaluation, Vol. 35, No. 11, 2007, pp. 36-44.
  73. “Characterization of Thermal Degradation of Liquid Amine Anti-Strip Additives in Asphalt Binders Due to RTFO and PAV-Aging” (N. Wasiuddin, C.M. Fogle, M. Zaman, and E.A. O’Rear). ASTM Journal of Testing and Evaluation,Vol. 35, No. 4, 2007, pp. 387-394.
  74. “A Comparative Laboratory Study of Sasobit® and Aspha-Min® in Warm Mix Asphalt.” (N. Wasiuddin, S. Selvamohan, M. Zaman, and M.L. Guegan). Transportation Research Record, J. of the Transportation Research Board, 1998, 2007, pp. 82-88.
  75. ²Environmental Effects on Durability of Aggregates Stabilized with Cementitious Materials² (N.N. Khoury and M. Zaman). ASCE Journal of Materials in Civil Engineering, Vol. 19, No. 1, 2007, pp. 1-8.
  76. ″Laboratory and Field Assessment of Pile run Chat from the Tar Creek Superfund Site Stabilized with Class C Fly Ash and Cement Kiln Dust″ (N.N. Khoury, R.V. Teredesai, M. Zaman, and C.N. Khoury). International Journal of Geotechnical Engineering, Vol. 1, Issue 1, 2007, pp. 71-80.
  77. “Characteristics of Chat-Asphalt for Road Base Application” (N.M. Wasiuddin, M. Zaman, R.W. Nairn and N. Kolothody). Journal of Solid Waste Tech. & Management, Vol 32, No. 3, 2006, pp. 125-137.
  78. “Durability Effect on Flexural Behavior of Cementitiously Stabilized Limestone Aggregate” (N.N. Khoury and M. Zaman). Journal of Testing and Evaluation, ASTM, Vol. 34, No. 3, 2006, pp. 167-175.
  79. “Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements” (R.A. Tarefder, M. Zaman, R. Sisson, and C.-F. Ting). Journal of Testing and Evaluation, ASTM, Vol. 34, No. 1, 2006, pp. 31-41.
  80. “Semi-Quantification of Cementing Products using X-Ray Diffraction Technique in Stabilized Aggregate” (N. Khoury, M. Zaman, and J.G. Laguros). J. of X-Ray Science and Tech., Vol. 14, No. 1, 2006, pp. 39-54.
  81. “Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements” (R.A. Tarefder, M. Zaman, R. Sisson and C.F. Ting). ASTM Journal of Testing and Evaluation, Vol. 34, No. 1, 2006, pp. 31-41.
  82. “Development and Application of a Rut Prediction Model for Flexible Pavement” (R.A. Tarefder, M. Zaman, and L. White). Journal of Transportation Research Record, 2005.
  83. “Analysis of Emulsion and Hot Asphalt Cement Chip Seal Performance” (D. Gransberg and M. Zaman). Journal of Transportation Engineering, ASCE, Vol. 131, No. 3, 2005, pp. 229-238.
  84. “Neural Network Model for Asphalt Concrete Permeability” (R.A. Tarefder, L. White, and M. Zaman). Journal of Materials in Civil Engineering, ASCE, Vol. 17, No. 1, 2005, pp. 19-27.
  85. “Modeling Fully Coupled Oil-Gas Flow in Dual-Porosity Medium” (R. Nair, Y. Abousleiman, and M. Zaman). International Journal of Geomechanics, ASCE, Vol. 5, No. 4, 2005, pp. 326-338.
  86. “Simple Expert System for Evaluation of Pollution Potential from Land Application of Manure” (A.N.M. Ahsanuzzaman, M. Zaman, and R. Kolar). Int. J. of Geomech., ASCE, Vol. 4, No. 4, 2004, pp. 285-295.
  87. “Analysis of Inclined Boreholes in Poroelastic Media” (S. Ekbote, Y. Abousleiman, L. Cui, and M. Zaman). International Journal of Geomechanics, ASCE, Vo. 4, No. 3, 2004, pp. 178-191.
  88. “Correlation Between Resilient Modulus, Moisture Variation and Soil Suction for Subgrade Soils” (N.N. Khoury, and M. Zaman). Journal of the Transportation Research Board, TRR No. 1874, 2004, pp. 99-107.
  89. “A Finite Element Porothermoelastic Model for Dual-Porosity Media” (R. Nair, Y. Abousleiman, and M. Zaman). International Journal for Numerical and Anal. Methods in Geomechanics, Vol. 28, 2004, pp. 875-898, 2004.
  90. “An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties” (M.S. Shaheed, R.A. Tarefder, and M. Zaman). J. of Testing and Evaluation, ASTM, Vol. 32, No. 4, 2004, pp. 322-333.
  91. “A Laboratory and Statistical Evaluation of Factors Affecting Rutting” (R.A. Tarefder, M. Zaman, and K.A. Hobson). International Journal of Pavement Engineering, IJPE, Vol. 4, No. 1, 2003, pp. 59-68.
  92. “Formulation of Mix Design and Asphaltic Encapsulation of Hydrocarbon Contaminated Soil,” (R.A. Tarefder, M.E., Ruckgaber, M. Zaman, M., and D. Patton). ASCE J. of Materials in Civil Eng., Vol. 15, No. 2, 2003, pp. 166-173.
  93. “Stochastic Inversion and Prediction Applied to Concrete Overlay Systems.” (L.W. White and M. Zaman). Applied Math and Computation, Vol. 128, 2002, pp. 59-79.
  94. “A Laboratory Assessment of Binders’ Contribution to Rutting Susceptibility” (R. Tarefder, M. Zaman and K. Hobson). International J. of Pavement, Vol. 1, No. 2, 2002, pp. 36-47.
  95. “Evaluating the CoreLokTM Measurement of Bulk Specific Gravity for Hot Mix Asphalt Samples” (R. Tarefder, M. Zaman and K. Hobson). ASTM J. of Testing and Evaluation, Vol. 30, No. 4, 2002, pp. 274-282.
  96. “Characteristics of Cold Processed Asphalt Millings and Cement-Emulsion Composite” (R. Issa, M. Zaman, G.A. Miller, and L.J. Senkowski). Transportation Research Record, TRR No. 1767, 2001, pp. 1-6.
  97. “Coupling Elastic Models Through Interfacial Conditions with Application to Concrete Overlays” (L.W. White and M. Zaman). Applied Math and Computation, Vol. 123, 2001, pp. 187-204.
  98. “A Simplified Model for Pavement Drainage” (L. White and M. Zaman). International Journal of Geomechanics, Vol. 1, 2001, pp. 65-82.
  99. “Field and Laboratory Evaluation of Cement Kiln Dust as a Cement Stabilizer” (G.A. Miller and M. Zaman). Transportation. Research Record, TRR No. 1714, 2000, pp. 25-32.
  100. “Cyclic Shear Strength of Soft Railroad Subgrade” (G.A. Miller, S.Y. Teh, M. Zaman and D. Li). Journal of Geotechnical and Geo-Environmental Eng., ASCE, Vol. 126, No. 2, 2000, pp. 139-147.
  101. “A Model for Fluid Accumulation and Flow in a Three-Dimensional Porous Medium” (H. Li, L. White, and M. Zaman). Applied Math and Computation, Vol. 108, 2000, pp. 177-19.
  102. “Durability Effects on Resilient Moduli of Stabilized Aggregate Base” (M. Zaman, J.-H. Zhu and J.G. Laguros). Transportation Research Record, TRR No. 1687, 1999, pp. 29-38.
  103. “Resilient Modulus and Microstructure of Cement-Kiln-Dust Stabilized Base/Subbase Aggregate” (J.-H. Zhu, M. Zaman, and J.G. Laguros). Soils and Foundations, Vol. 39, No. 6, 1999, pp. 33-42.
  104. “Stability of Boreholes in a Geologic Medium Including the Effects of Anisotropy” (D. Gupta and M. Zaman). Applied Math. And Mech., Vol. 20, No. 8, 1999, pp. 837-866.
  105. “Building a Knowledge-Efficient Sanding Advisor” (M. Kanj, J.-C. Roegiers, and M. Zaman). Knowledge-Based Systems, Vol. 12, 1999, pp. 145-158.
  106. “Effects of In Situ Stresses on Fluid Flow in Fractured Reservoirs” (F. Meng, M. Bai, M. Zaman, and J.-C. Roegiers). In Situ, Vol. 23, No. 2, 1999, pp. 107-130.
  107. “Analytical Method for Analysis of Slope Stability” (J. Cao and M. Zaman). Int. J. for Numerical and Analytical Methods in Geomech., Vol. 23, 1999, pp. 439-449.
  108. “A Semi-Analytical Solution for a Two-Dimensional Capacitance Model in Solute Transport” (M. Bai, Z. Shu, J. Cao, M. Zaman and J.-C. Roegiers). Petroleum Science and Engineering Journal, Vol. 22, No. 2, 1999, pp. 275-295.
  109. “Discussion on Resilient Modulus of Cohesive Soils” (J.-H. Zhu and M. Zaman). Journal of Geotech. And Geoenvironmental Eng., ASCE, Vol. 124, No. 11, 1998, pp. 1155-1156.
  110. “Modeling Soil Behavior with a Recurrent Neural Network” (J.-H. Zhu, M. Zaman, and S.A. Anderson). Canadian Geotech. Journal, Vol. 35, 1998, pp. 858-872.
  111. “Variation of Resilient Modulus of Aggregate Bases and Its Influence on Pavement Performance” (P. Tian, M. Zaman, and J.G. Laguros). ASTM J. of Testing & Eval., Vol. 26, No. 4, 1998, pp. 329-335.
  112. “Cracking Characteristics of Model CRC Pavements” (M.I. Haque, M. Zaman, and A.A. Soltani). Accepted for Publication in Transp. Res. Record, TRR No. 1629, 1998, pp. 90-98.
  113. “Gradation and Moisture Effects on Resilient Moduli of Aggregate Base” (T. Ping, M. Zaman, and J.G. Laguros). Transp. Research Record, TRR No. 1619, 1998, pp. 75-84.
  114. “Acoustic-Velocity Signatures Associated with Rock Deformation Process” (T.E. Scott, M. Zaman, and J.-C. Roegiers). Journal of Petroleum Tech., Distinguished Author Series, 1998, pp. 70-74.
  115. “Modeling Shearing Behavior of a Residual Soil with Recurrent Neural Network” (J.H. Zhu, M. Zaman, and S.A. Anderson). Int. J. For Num. & Anal. Met. In Geomech., Vol. 22, 1998, pp. 671-687.
  116. “Fracture Toughness of a Soft Sandstone” (G.R. Krishnan, X.L. Zhao, M. Zaman, and J.-C. Roegiers). Int. Journal of Rock Mech. & Mining Sci., Vol. 35, No. 8, 1998, pp. 695-710.
  117. “A Simple Model for Fluid Accumulation and Flow in a Porous Medium” (L.W. White and M. Zaman). Applied Mathematics and Computation, Vol. 90, 1998, pp.181-203.
  118. “Numerical Modeling of Stress-Dependent Permeability” (F. Meng, M. Bai, J. Cao, M. Zaman, and J-C. Roegiers). Int. Journal of Rock Mech. & Mining Sci., Vol. 34, No. 3-4, 1997, pp.446 (full paper appeared on CD).
  119. “Applications of Time-Dependent Pseudo-3D Stress Analysis in Evaluating Wellbore Stability” (Y. Abousleiman, L. Cui, S. Ekbote, M. Zaman, J.-C. Roegiers, and A.H-D. Chang). Int. Journal of Rock Mech. & Mining Sci., Vol. 34, No. 3-4, 1997, pp.421 (full paper appeared on CD).
  120. Sanding: An Expert System Approach for Assessment and Control in Wells” (M. Kanj, M. Zaman, and J.-C. Roegiers). Journal of Energy Resources Tech., ASME, Vol. 119, No. 4, 1997, pp. 223-235.
  121. Stress-Dependent Permeability Measurement Using the Oscillating Pulse Technique” (P. Suri, M. Azeemuddin, M. Zaman, A.R. Kukreti, and J.-C. Roegiers). Petroleum Science and Engineering, Vol. 17, 1997, pp. 247-264.
  122. “Modeling Time Dependent Behavior of Pavement Drainage Using Linear System Identification and Neural Network Techniques” (M. Rahman, S.I. Sudharsan, K.K. Muraleetharan, and M. Zaman). Transp. Research Board, TRB 1582, 1997, pp. 34-41.
  123. “Creep Constitutive Modeling of Rock Salt and Evaluation of Model Parameters Using Optimization Technique” (M. Zaman, M.I. Hossain, and M.O. Faruque). Indian Geotech. Journal, Vol. 12, No. 6, 1996, pp. 761-780.
  124. “Dynamic Response of Cable-Stayed Bridges to Moving Vehicles Using the Structural Impedance Method” (M. Zaman, A. Khanna, and M.R. Taheri). Applied Mathematical Modeling, Vol. 20, 1996, pp. 887-889.
  125. “Creep Constitutive Modeling of an Aluminum Alloy Under Multiaxial and Cyclic Loading” (M.O. Faruque, M. Zaman, and M.I. Hossain). International J. of Plasticity, Vol. 12, No. 6, 1996, pp. 761-780.
  126. “Micro Mechanisms of Pore Collapse in Limestone” (S. Mowar, M. Zaman, D.W. Stearns and J.-C. Roegiers). J. of Petroleum Science and Eng., Vol. 15, No. 2/4, 1996, pp. 221-235.
  127. “Assessment of Computer Programs for Analysis of Flexible Pavement Structure” (D.H. Chen, M. Zaman, J.G. Laguros and A. Soltani). Transp. Research Record, No. 1482, 1995, pp. 123-133.
  128. “Changes in Acoustic Velocity During Pore Collapse of Rocks” (T.E. Scott, M. Azeemuddin, M. Zaman, and J.-C. Roegiers), ISRM News Journal, Vol. 3, No. 1, 1995, pp. 14-17.
  129. “Effects of a Moving Aircraft and Temperature Differential on Response of Rigid Pavements” (M.R. Taheri and M. Zaman). Computers and Structures, Vol. 57, No. 3, 1995, pp. 503-511.
  130. “A Contact Element Model for the Dynamic Analysis of Jointed Concrete Pavements” (M. Zaman and A. Alvappillai). ASCE Transp. Eng. Div., Vol. 121, No. 5, Sept./Oct., 1995, pp. 425-433.
  131. “Static and Dynamic Analysis of Concrete Pavements Including Thermal Warping Effects” (M. Zaman, M.R. Taheri and V. Khanna) Arabian J. of Science and Engr., Vol. 20, No. 3, 1995, pp. 433-466.
  132. “Creep Modeling of Rock Salts for Geoenvironmental Application” (M.I. Hossain, M.O. Faruque and M. Zaman). ASME J. Energy Resources Tech., Vol. 117, No. 2, 1995, pp. 108-114.
  133. “Characterization of Base/Subbase Materials Under Repetitive Loading” (D.H. Chen, M. Zaman and J.G. Laguros). ASTM J. of Testing and Evaluation, Vol. 23, No. 3, 1995, pp. 180-188.
  134. “Resilient Moduli of Aggregate Materials: Variability Due to Testing Procedure and Aggregate Type” (D.H. Chen, M. Zaman and J.G. Laguros). Transp. Research Record, No. 1462, 1995, pp. 57-64.
  135. “Resilient Moduli of Granular Materials and Their Correlations with Other Engineering Properties” (M. Zaman, D.H. Chen and J.G. Laguros). ASCE Transp. Div. Journal, Vol. 120, No. 6, 1994, pp. 967-988.
  136. “Application of Infinite Elements to Seepage Analysis in Geotechnical Perspective” (M. Zaman and D. Bhat). Discussion of paper by Y. Honjo and G. Pokharel, Soils and Foundations, Vol. 34, No. 2, 1994, pp. 116-117.
  137. “A FE Model for Ekofisk Field Subsidence” (A. Abdulraheem, M. Zaman and J.-C. Roegiers), J. of Petroleum Science and Eng., Vol. 10, 1994, pp. 299-310.
  138. “Pore Collapse Behavior of Weakly Cemented and Porous Rocks” (M. Zaman, J.-C. Roegiers, A. Abdulraheem and M. Azeemuddin) ASME J. of Energy Resources Technology, Vol. 116, 1994, pp. 97-103.
  139. “A Two Characteristic Model for Cohesionless Soil and Its Calibration Using Optimization” (A. Abdulraheem, M.O. Faruque, and M. Zaman). Int. J. of Plasticity, Vol. 10, No. 3, 1994, pp. 309-326.
  140. “Surface Subsidence Prediction by Nonlinear Finite Element Analysis” (Y. Najjar and M. Zaman). ASCE Journal of Geotechnical Engineering, Vol. 119, 1993, pp. 1790-1804.
  141. “Analysis of Fluid Storage Tanks Including Foundation-Superstructure Interaction” (A.R. Kukreti, M.M. Zaman and A. Issa). Applied Mathematical Modelling, Vol. 17, 1993, pp. 618-631.
  142. “Numerical Simulation of a Compacting Reservoir” (A. Abdulraheem, M. Zaman, and J.-C. Roegiers). Int. J. of Rock Mech. and Mining Sciences, Vol. 30, No. 7, 1993, pp. 1299-1302.
  143. “Numerical Modeling of Ground Subsidence due to Mining” (Y.M. Najjar and M. Zaman). Int. J. of Rock Mech. and Mining Sciences, Vol. 30, No. 7, 1993, pp. 1445-1448.
  144. “Dynamic Response of Concrete Pavements Resting on Viscoelastic Foundation to Moving Loads” (A. Alvappillai, M. Zaman, and M.R. Taheri). European J. of Mechanics, A/Solids, Vol. 12, No. 1, 1993, pp. 79-93.
  145. “Dynamic Analysis of Concrete Pavements Resting on a Two-Parameter Medium” (M. Zaman, A. Alvappillai and M.R. Taheri). Int. J. for Numerical Methods in Engineering, Vol. 36, 1993, pp. 1465-1486.
  146. “Effects of Cap Thickness and Pile Inclination on the Response of a Pile Group Foundation by a Three-Dimensional Nonlinear Finite Element Analysis” (M. Zaman, Y.M. Najjar and A. Muqtadir). Computers and Geotechnics, Vol. 15, 1993, pp. 65-86.
  147. “Modeling of Stress-Strain Behavior of Plain Concrete Using a Plasticity Framework” (M. Zaman, Y.M. Najjar and M.O. Faruque). Materials and Structures Journal, Vol. 26, 1993, pp. 129-135.
  148. “On Modeling Stress-Strain and Dilatant Behavior of Cohesionless Soil (M.O. Faruque, and M. Zaman). Indian Geotech. Journal, Vol. 22, No. 3, 1992, pp. 175-195.
  149. “Finite Element Algorithm for Jointed Concrete Pavements Subjected to Moving Aircraft.” (A. Alvappillai, M. Zaman and J.G. Laguros). Computers and Geotechnics, Vol. 14, 1992, pp. 121-147.
  150. “A Mixed-Variational Approach for the Analysis of Circular Plate-Elastic Halfspace Interaction” (M.O. Faruque and M.M. Zaman). Comp. Met. in Applied Mech. and Engr., Vol. 92, 1991, pp. 75-86.
  151. “Dynamic Response of Thick Plates on Viscoelastic Foundation to Moving Loads” (M. Zaman, M.R. Taheri and A. Alvappillai). Int. J. for Numerical and Anal. Methods in Geomech., Vol. 15, 1991, pp. 627-647.
  152. “On the Concept of Characteristic States of Cohesionless Soil and Constitutive Modeling” (M.O. Faruque and M. Zaman). Soils and Foundations, Vol. 31, No. 2, 1991, pp. 111-121; Closure: Vol. 33, No. 1, 1993, pp. 209-210.
  153. “Mixed-Variational Approach for Restrained Plate-Half-space Interaction” (M. Zaman and M.O. Faruque). Journal of Engr. Mech. Div., ASCE, Vol. 117, No. 8, 1991, pp. 1755-1770.
  154. “Analysis of the Interaction Between a Moderately Thick Plate and an Isotropic Elastic Halfspace by Using a Mixed-Variational Principle” (M.O. Faruque and M.M. Zaman). Soils and Foundations, Vol. 31, No. 1, 1991, pp. 73-82.
  155. “Analysis of Foundation-Elastic Halfspace Interaction Using a Mixed-Variational Approach” (M.M. Zaman, N. Uddin and M.O. Faruque). Soils and Foundations, Vol. 31, No. 1, 1991, pp. 27-38.
  156. “Consolidation Settlements of Bridge Approach Foundation” (M.M. Zaman, A. Gopalasingam and J.G. Laguros). Journal of Geotech. Eng. Div., ASCE, Vol. 117, No. 2, 1991, pp. 219-240.
  157. “Analysis of Moderately Thick Restrained Circular Plates Resting on an Isotropic Elastic Halfspace” (M.M. Zaman, M.O. Faruque and A. Mahmood). Applied Math. Modeling, Vol. 14, 1990, pp. 352-361.
  158. “Dynamic Response of Concrete Pavement to Moving Aircraft” (M.R. Taheri, M.M. Zaman and A. Alvappillai). Applied Math. Modeling, Vol. 14, 1990, pp. 562-575.
  159. “Elasto-Plastic Constitutive Modeling of Plain Concrete and an Optimization Procedure for Parameter Evaluation” (Y.M. Najjar, M.M. Zaman and M.O. Faruque). Computers and Geotechnics, Vol. 9, 1990, pp. 185-208.
  160. “Creep Response of 2618-T61 Aluminum Under Multiaxial Loading” (I.U. Mahmood, M.O. Faruque and M.M. Zaman). ASME, Journal of Applied Mechanics, Vol. 56, No. 3, 1989, pp. 514-518.
  161. “Analysis of Tank-Foundation-Halfspace Interaction Using an Energy Approach” (M.M. Zaman and N. Koragappa). Applied Mathematical Modelling, Vol. 13, 1989, pp. 66-78.
  162. “Analysis of Cylindrical Storage Tank Foundation Interaction Using Finite Element Method” (M.M. Zaman and I.U. Mahmood). Indian Geotech. Journal, Vol. 18, No. 4, 1988, pp. 365-384.
  163. “Efficient Solution for Finite Element Formulation of Flow of Immiscible Fluids in Compressible Heterogeneous Irregular Shaped Reservoirs” (A.R. Kukreti, M.M. Zaman, F. Civan and Y. Rajapaksa). Petroleum Engineering and Science, Vol. 1, 1988, pp. 277-294.
  164. “Analysis of Circular Plate-Elastic Halfspace Interaction Using an Energy Approach” (M.M. Zaman, A.R. Kukreti and A. Issa). Applied Mathematical Modeling, Vol. 12, 1988, pp. 285-292.
  165. “On Modeling of Steady State and Transient Creep of Polycrystalline Solids” (M.O. Faruque and M.M. Zaman). Acta Mechanica, Vol. 71, 1988, pp. 115-136.
  166. “A Cylindrical Tank-Foundation-Halfspace Interaction Using an Energy Approach” (A. Issa and M.M. Zaman). Computer Methods in Applied Mechanics and Eng., Vol. 56, 1986, pp. 47-60.
  167. “Cyclic Testing and Modelling of Interfaces” (C.S. Desai, E.C. Drumm and M.M. Zaman). Journal of Geotechnical Eng. Div., ASCE, Vol. 111, No. 6, 1985, pp. 794-815.
  168. “A Variational Approach for the Analysis of Square and Rectangular Plates Resting in Smooth Contact with an Isotropic Elastic Halfspace” (M.M. Zaman and M.O. Faruque). Soils and Foundations, Vol. 25, No. 1, 1985, pp. 15-26.
  169. “An Interface Model for Dynamic Soil-Structure Interaction” (M.M. Zaman, C.S. Desai and E.C. Drumm). Journal of Geotechnical Eng. Div., ASCE, Vol. 110, No. GT9, 1984, pp. 1257-1273.
  170. “A Hyperelastic Model for Granular Materials Under Monotonic Loading” (M.M. Zaman, G. Ayala and T. Kuppusamy). Indian Geotechnical Journal, Vol 14, No. 3, 1984, pp. 163-182.
  171. “Thin-Layer Element for Interfaces and Joints” (C.S. Desai, M.M. Zaman, J.G. Lightner and H.J. Siriwardane). International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 8, No. 1, 1984, pp. 19-43.
  172. “New Models for Rock Joints and Interfaces” (F.E.Heuze and T.G. Barbour). Discussion, Journal of Geotechnical Eng. Div., ASCE, Vol. 109, No. 7, 1982, pp. 1009-1011.

Refereed Conference Papers

  1. Barman, M., Ghabchi, R., Singh, D., Zaman, M. and Commuri, S. (2015). “A Comparative Evaluation of Three Different Fatigue Test Methods of Asphalt Mixes.” 3rd Conf. on Transp. Research Group of India (CTRG), held in Kolkata, Dec. 17-20.
  2. Barman, M., Imran, S. A., Nazari, M., Commuri, S. and Zaman, M. (2015). “Intelligent Compaction of Stabilized Subgrade of Flexible Pavement,” Int’l Foundations Congress and Equipment EXPO, IFCEE-2015, San Antonio, Texas. March 17-21, 2015, Published in the ASCE Geotechnical Special Publication No. 256, IFCEE 2015 © ASCE 2015, pp 2554-2566.
  3. Hossain, Z., Zaman, M., Ghosh, D. and Hobson, K. (2015), “Guidelines for Implementation of the Multiple Stress Creep Recovery (MSCR) Test Method.” 94th TRB Annual Meeting, held in Washington, D.C. on January 12-16 (Paper #15-4318).
  4. Hossain, Z., Zaman, M., Hawa, T., and Saha, M. (2015). “Evaluation of Moisture Susceptibility and Healing Properties of Nanoclay-Modified Asphalt Binders, Int’l. Foundations Congress and Equipment EXPO (IFCEE 2015), pp. 339-348.
  5. Hossain, Z., Bairgi, B., Zaman, M., Bulut, R. (2015). “Prediction of Stripping Resistance of Nanoclay-modified Asphalts Using Their Surface Chemistries,” Submitted to 2016 Geo-Chicago, to be held in Chicago, Illinois, August 14-18, 2016.
  6. Imran, S., Commuri, S., and Zaman, M. (2015). “A 2 Dimensional Dynamical Model of Asphalt-Roller Interaction During Vibratory Compaction.” Proceedings of the 12th International Conference on Informatics in Control, Automation and Robotics, pp. 533-540, Colmar, Alsace, France.
  7. Zaman, M., Pittenger, D. and Cumberpatch, L. (2015), “Evaluation of Chemical Hardening Process to Inhibit Aggregate Abrasion and Polishing.” 94th Transp. Research Board Annual Meeting, held in Washington, D.C. on January 12-16 (Paper #15-0378).
  8. Singh, D.V., Beainy, F., Zaman, M., Commuri, S. (2014). “Application of Intelligent Compaction Technology for Estimation of Effective Modulus for A Multilayered Asphalt Pavement,” GSP 249: Recent Developments in Evaluation of Pavements and Paving Materials, Geo-Hubei 2014, Edited by R.A. Tarefder, J. Hu, M. Zaman, and D.H. Chen, ISBN (print): 978-0-7844-7849-3, ASCE.
  9. Pittenger, D., Granberg, D., Zaman, M., and Riemer, C. (2014). “Comparative Analysis of Microsurfacing and Slurry Seal for Rut Filling.” CD ROM publication (Paper #14-0756), 93rd Res. Board Annual Meeting, held in Washington, D.C. on January 12-16.
  10. Imran, S.A., Barman, M., Nazari, M., Commuri, S., Zaman, M. (2014). “Continuous Monitoring of Subgrade Stiffness during Compaction,” Paper ID # 233, 11th International Conference on Transportation Planning and Implementation Methodologies for Developing Countries, TPMDC, IIT Bombay, India, December 10-12.
  11. Imran, S.A., Beainy, F., Commuri, S., and Zaman, M. (2014). ” Dynamical Model of Asphalt-Roller Interaction During Compaction,” ICINCO – 11th International Conf. on Informatics in Control, Automation and Robotics, Paper ID# 210, Vienna, Austria, Sept. 1-3.
  12. Hossain, Z., Zaman, M., Saha, M., and Hawa, T. (2014). “Evaluation of Moisture Susceptibility of Nanoclay-Modified Asphalt Binders,” GSP 244: Application of Nanotechnology in Pavements, Geological Disasters, and Foundation Settlement Control Technology, Geo-Hubei 2014, Edited by D. Singh, L.F. Walubita, J. Oh, and K. Li, ISBN: 978-0-7844-7844-8, ASCE, pp. 1-8.
  13. Hossain, Z., Zaman, M., Saha, M.C., and Hawa, T. (2014). “Evaluation of Viscosity and Rutting Properties of Nanoclay-modified Asphalt Binders,” Geo-Congress on Geo-Characterization and Modeling for Geo-sustainability, held in Atlanta, GA on Feb. 23-26 (10 pages).
  14. Hossain, N., Singh, D., Zaman, M. and Rassel, S.M. (2014). “Local Calibration MEPDG Rut Models: Oklahoma’s Experience from an Instrumented Pavement Section.” 14th Int. Conf. Int. Assoc. Comp. Methods and Advances in Geomech. (IACMAG), pp. 135-140.
  15. Ghabchi, R., Singh, D. V., and Zaman, M. (2014). “Effects of RAP Binder on Moisture-Induced Damage Potential of Asphalt Mixes with Limestone Aggregates,” 14th Int. Conf. Int. Assoc. Comp. Methods and Advances in Geomech. (IACMAG) held on Sept. 22-25 at Kyoto, Japan, pp. 453–458.
  16. Diab, A., You, Z., Hossain, Z., and Zaman, M. (2014). “Moisture Susceptibility Evaluation of Nano-sized Hydrated Lime-Modified Asphalt-Aggregate Systems Based on Surface Free Energy Concept.” CD ROM publication (Paper #14-???), 93rd Transportation Research Board Annual Meeting, held in Washington, D.C. on January 12-16.
  17. Barman, M., Nazari, M., Imran, S.A., Commuri, S., and Zaman, M. (2014). “Application of Intelligent Compaction Technique in Real-Time Evaluation of Compaction Level During Construction of Subgrade.” CD ROM publication (Paper #14-5183), 93rd Transportation Research Board Annual Meeting, held in Washington, D.C. on January 12-16.
  18. Barman, M., Imran, S.A., Nazari, M, Commuri, S., Zaman, M., and Singh, D.V. (2014). “Continuous Monitoring of Subgrade Stiffness During Compaction,” 11th Planning and Impl. Methodologies for Developing Countries (TPMDC), held on Dec. 10-12 in Mumbai, India (?? Pages).
  19. Barman, M., Ghabchi, R., Singh, D. V., Zaman, M., Commuri, S., and Hobson, K. (2014). “Evaluation of Fatigue Performance of Asphalt Mixes Using Semi-Circular Bend and Four Point Beam Fatigue Test Methods,” 14th Int. Conf. Int. Assoc. Comp. Methods and Advances in Geomech. (IACMAG) held on Sept. 22-25 at Kyoto, Japan: pp. 459–464.
  20. Solanki, P., Zaman, M., and Khalife, R. (2013), “Effect of Freeze-Thaw Cycles on Performance of Stabilized Subgrade,” GeoCongress 2013, Sound Geotechnical Research to Practice, Geotechnical Special Publication Honoring the Contributions of Robert D. Holtz, March 3-6, 2013, San Diego, California, pp. 567-581.
  21. Solanki, P., Zaman, M., Adje, D., and Hossain, Z. (2013). “Mechanistic Characteristics of Hot Mix Asphalt Containing Reclaimed Asphalt Pavement,” 8th International Conf. on Road and Airfield Pavement Tech. (ICPT 2013), July 14-18, 2013, Taipei, Taiwan, 9 pages.
  22. Singh, D.V., Zaman, M., Commuri, S. (2013). “Comparison of Morphological Properties of Different Types of Coarse Aggregates,” Air Field and Highway Pavements Conference, 2013, Edited by Imad L. Al-Qadi and Scott Murrell, (ISBN: 978-0-7844-1300-5), Transportation and Development Institute, held in Los Angeles, CA. doi: 10.1061/9780784413005.106.
  23. Hossain, Z., Zaman, M., and Saha, M. (2013), “Evaluation of Rutting and Moisture Susceptibility of Nanoclay-Modified Asphalt Binders.” 17th IRF World Meeting & Exhibition, held in Riyadh, Saudi Arabia, November 10-14, 2013, 13 pages.
  24. Hossain, Z., Zaman, M., and Solanki, P. (2013), “Viscoelastic Properties of Asphalt Binders Recovered from Reclaimed Asphalt Pavement.” 17th IRF World Meeting & Exhibition, held in Riyadh, Saudi Arabia, November 10-14, 2013, 13 pages.
  25. Hossain, Z., Zaman, M., and Doiron, C. (2013), “Mechanistic Empirical Pavement Design Guide Input Parameters for Unbound Aggregates in Oklahoma,” 2nd IACGE Int. Conf. on Geotech. and Earthquake Engineering, held in Chengdu, China on October 25-27, 2013, 8 pages.
  26. Hossain, N., Solanki, P., Muraleetharan, K. K., Zaman, M., and Singh, D. (2013), “Development of Field Rut Prediction Models from an Instrumented Test Section on Interstate-35” (CD ROM, Paper No. 13-3656), Research Board 92nd Annual Meeting, held in Washington, D.C., January 13-17, 2013, 17 pages.
  27. Ghabchi, R., Singh, D., Zaman, M., and Tian, Q. (2013). “Application of Asphalt-Aggregates Interfacial Energies to Evaluate Moisture-Induced Damage of Warm Mix Asphalt.” 2nd Conf. of Transportation Research Group of India (CTRG), held in Agra, India on December 12-15, 2013, 10 pages.
  28. Ghabchi, R., Singh, D., Zaman, M. and Tian, Q. (2013), “A Laboratory Study of Warm Mix Asphalt for Moisture Damage Potential Using Surface Free Energy Method.” Airfield and Highway Pavement Conference: Sustainable and Efficient Pavements, Transportation & Development Institute of ASCE, held in Los Angeles, CA on June 9-12, 2013, pp. 54-63.
  29. Mahmood T., Hatami K., Ghabchi, R., and Zaman, M., “Pullout Performance of Geogrids with Different Junction Strength.”GeoCongress 2012, Oakland, CA, March 25-29, 2012.
  30. Mahmood T., Hatami K., Ghabchi, R., and Zaman, M., “Laboratory Investigation of Pullout Behavior of Non-extruded Geogrids in a Base Aggregate.” 91st TRB Annual Meeting, Paper No.12-4222, Washington, DC., Jan. 22-26, 2012.
  31. Ghabchi, R., Mahmood, T., Hatami, K., and Zaman, M., “Effect of Geogrid Type on Performance of Reinforced Dense-Graded Aggregate Base.” 5th Asian Regional Conference on Geosynthetics, December 13-16, 2012, Bangkok, Thailand.
  32. Singh, D.V., Zaman, M., and Commuri, S. (2012). “Comparison of Shape Parameters for Different Types and Sizes of Coarse Aggregates for Pavement Applications,” Paper No. 12-0758, Transportation Research Record 92nd Annual Meeting, Washington, D.C., CD-ROM Publication, January 22-26, 2012.
  33. Singh, D.V., Zaman, M., and White, L., “Neural Network Modeling of 85th Percentile Speed for Two-Lane Rural Highways,” Paper No. 12-0876, Transportation Research Board 92nd Annual Meeting, Washington, D.C., CD-ROM Publication, January 22-26, 2012.
  34. Hossain, Z., Zaman, M., and Doiron, C. “Evaluation of Resilient Response of Unbound Aggregates Toward Implementation of the Mechanistic-Empirical Pavement Design in Oklahoma,” 91st Annual Meeting DVD-ROM Compendium Paper, Transportation Research Board (TRB), 2012.
  35. Hossain, Z., and Zaman, M., “Evaluation of High Temperature Viscoelastic Characteristics of Warm Mix Additive Modified Binders and Prediction of Dynamic Modulus of Mixes,” 91st Annual Meeting DVD-ROM Compendium Paper, Transportation Research Board (TRB), 2012.
  36. Solanki, P., Hossain, Z., Zaman, M., and Adje, D., “Volumetric and Mechanistic Characteristics of Asphalt Mixes Containing Recycled Asphalt Pavement,” GeoCongress 2012, March 25-29, 2012.
  37. Hossain, Z., Solanki, P., Zaman, M., “Mechanistic Evaluation of Recovered Materials from Recycled Asphalt Pavement,” GeoCongress 2012, March 25-29, 2012.
  38. Hossain, Z., Buddhalla, A., O’Rear, A. O., Zaman, M., Laguros, J. L., and Lewis, S., “Recycled Asphalt Pavement in new Asphalt Mixtures: State of the Practice,” 2nd International symposium on Asphalt Pavement and Environment, held in Fortaleza, Brazil on October 1-3, 2012.
  39. Solanki, P., Hossain, Z., Adje, D., and Zaman, M., “Effect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot Mix Asphalt,” 2nd International Symposium on Constitutive Modeling of Geomaterials: Advances and New Applications, Beijing, China, October 15-16, 2012.
  40. Hossain, Z., Zaman, M., Doiron, C., and Solanki, P., “Evaluation of Mechanistic-Empirical Design Guide Input Parameters for Resilient Modulus of Stabilized Subgrade Soils,” ICSDEC 2012/ASCE Texas Section Conference/CI Summit, November 7-9, 2012.
  41. Solanki, P., Zaman, M., Muraleetharan, K., Briedy, M., Boser, R. and Park, B., “A Study of Construction and Instrumentation of Pavement Test Section on I-35 in Oklahoma.” Associated Schools Construction Region III Conf., Downers Grove, Illinois, Oct. 26-29, 2011, pp. 13-20.
  42. Akkari, R.A., Pei, J.S., Ibrahim, T.S., Zaman, M.M., Tang, F.P., Tang, L., Breidy, M.,H., and Hurdelbrink, K.R. “Initial design and validation of packaging directional antennas for structural health and road condition monitoring”, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 6-10, 2011, 6 pages.
  43. Ghabchi, R., Zaman, M. and Khoury, N., “Limitations of Field Permeability Test on Different Gradations of a Limestone Aggregate Base.” 13th International Conf. of IACMAG, held in Melbourne, Australia on May 9-11, 2011, pp. 1116-1122.
  44. Hossain, N., Solanki, P., and Zaman, M., “Development of Rut Prediction Model from APA Rut Test,” 13th International Conf. of IACMAG, held in Melbourne, Australia on May 9-11, 2011, pp. 1093-1098.
  45. Singh, D.V., Zaman, M., and Commuri, S., “Comparison of Hierarchical Levels of MEPDG for Predicting Dynamic Modulus of Asphalt Mix.” 13th International IACMAG Conf., held in Melbourne, Australia on May 9-11, 2011, pp. 1099-1103.
  46. Singh, D.V., Zaman, M. and Commuri, S., “Evaluation of Predictive Models for Estimating Dynamic Modulus of HMA Mixes Commonly Used in Oklahoma.” 90th Annual TRB Meeting and Online Compendium paper (11-3885), held in Washington, DC. on Jan. 23-27, 2011, 18 pages.
  47. Hatami, K., Ghabchi, R., Mahmood, T. and Zaman, M., “In-Aggregate Performance of Unitized Woven Geogrids in Open-Graded and Dense-Graded Aggregates.” 90th Annual TRB Meeting and Online Compendium paper (11-4078), held in Washington, DC. on Jan. 23-27, 2011, 14 Pages.
  48. Hossain, Z., M. Zaman, E. O’Rear, and Chen, D. “Laboratory Evaluation of Water-bearing Additive for Warm Mix Asphalt.” 90th Annual TRB Meeting and Online Compendium paper (11-3381), to be held in Washington, DC. on Jan. 23-27, 2011, 13 Pages.
  49. Hossain, Z., Zaman, M., O’Rear, E. and Chen, D-H., “Effectiveness of Advera on Warm Mix Asphalt.” Geotechnical Special Publication (GSP 218), ASCE, Emerging Tech. for Materials Design, Rehabilitation, and Inspection of Roadway Pavements, pp. 9-16.
  50. Hossain, Z., Zaman, M., Doiron, C. and Solanki, P., “Characterization of Subgrade Resilient Modulus for Oklahoma Soils for Pavement Design.”GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4823-4832.
  51. Solanki, P. and Zaman, M., “Characterization of Lime- and Fly Ash-Stabilized Soil by Indirect Tensile Testing.” GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4438-4448.
  52. Hatami, K., Mahmood, T., Ghabchi, R. and Zaman, M., “In-Aggregate Performance of Unitized and Woven/Knitted Geogrids for Base Reinforcement Application.” GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4635-4644.
  53. Singh, D., Zaman, M. and Commuri, S., “Effect of Long Term Oven Aging (LTOA) on Dynamic Modulus of Hot Mix Asphalt.” GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4773-4781.
  54. “Influence of Cement Kiln Dust on Strength and Stiffness Behavior of Typical Clays” (P. Solanki, P. and M. Zaman). To appear in Proc. ASCE Special Publication, GeoHunan, Changsha, PRC, Aug. 3-6, 2009.
  55. “Performance Assessment of Cementitiously Stabilized Subgrade Soils” (P. Solanki, N. Khoury and M. Zaman). CD ROM Publication (09-0288), 88th Transportation Research Board Meeting, Jan. 11-15, 2009.
  56. “Variations of Resilient Modulus of Subgrade Soils with Post-Compaction Moisture Contents” (B. Robert, N. Khoury, M. Zaman and C.N. Khoury). CD ROM Publication (09-0297), 88th Annual Transportation Research Board Meeting, Jan. 11-15, 2009.
  57. “Rheological Properties of Performance Grade Binders Using a Dynamic Mechanical Analyzer” (Z. Hossain and M. Zaman). Inaugural Int’l Conf. of the Engineering Mech. Inst., Minneapolis, May 18-21, 2008.
  58. “Moisture Susceptibility and Swelling Behavior of Stabilized Lean Clays” (P. Solanki, N. Khoury and M. Zaman). 12th IACMAG Conf., Goa, India, Oct. 1-6, 2008, pp. 3700-3709.
  59. Hossain, Z. and Zaman, M., “Dynamic Mechanical Analysis of Performance Grade Asphalt Binder” (Z. Hossain and M. Zaman). 12th IACMAG Conf., Goa, India, Oct. 1-6, 2008, pp. 4354-4361.
  60. “Constitutive Modeling of Normal Strength and High Performance Concrete Using Hierarchical Single Surface Model” (M. Zaman, P. Solanki and M.P.Y. Chin). 12th IACMAG Conf., Goa, India, Oct. 1-6, 2008, pp. 1308-1315.
  61. “Neural Network-based Intelligent Compaction Analyzer for Estimating Compaction Quality of Hot Asphalt Mixes” (S. Commuri, A.T. Mai and M. Zaman). IFAC World Congress, Seoul, Korea, July 6-11, 2008.
  62. “Effect of Sasobit and Asphamin on Wettability and Adhesion Between Asphalt Binders and Aggregates” (N.M. Wasiuddin, M. Zaman and E.A. O’Rear). CD ROM Publication (08-2853), 87th Annual TRB Meeting, Washington, D.C., Jan. 13-17, 2008.
  63. “Experimental Analysis and Statistical Modeling of Cementitiously Stabilized Subgrade Soil″ (P. Solanki, N. Khoury and M. Zaman). CD ROM Pub. (08-2474), 87th Annual Mtg. , Washington, D.C., Jan. 13-17, 2008.
  64. “Estimating Resilient Modulus Using Neural Network Models” (M. Zaman, A. Ebrahimi and L. White). ANNIE 2007 Conf., St. Louis, Missouri, Nov. 11-14, 2007.
  65. “Innovation and Application of Environmental Technologies: Strategies, Progress, and Prospects in Oklahoma” (M. Meo, R.W. Nairn, J.G. Laguros and M. Zaman). 10th Int’l Conf. on Environmental Science and Tech., Kos Island, Greece, Sept. 5-7, 2007.
  66. “Stiffness and Drainage Characteristics of Unbound Aggregate Bases” (N.N. Khoury and M. Zaman). CD ROM Pub. (07-3022), 86th Annual Mtg. of Transp. Research Board , Washington, D.C., Jan. 21-25, 2007.
  67. “Effect of Polymer Treatment Using Styrene-Butadiene Rubber for Moisture-Induced Damage Potential” (N.M. Wasiuddin, M. Zaman and E.A. O’Rear). CD ROM Publication (07-3248), 86th Annual TRB Meeting, Jan. 21-25, 2007, Washington, D.C.
  68. “Evaluating Laboratory Modulus and Rutting of Asphalt Concrete” (R.A. Tarefder, J.C. Stormount and M. Zaman). CD ROM Publication (07-1889), 86th Annual TRB Meeting, Jan. 21-25, 2007, Washington, D.C.
  69. “Comparative Study of Sasobit and Asphamin in Warm-Mix Asphalt” (N.M. Wasiuddin, S. Selvamohan and M. Zaman). CD ROM Publication (07-2047), 86th Annual TRB Meeting, Jan. 21-25, 2007, Washington, D.C.
  70. “Use of Raw Chat in Hot-Mix-Asphalt Surface: Environmental and Engineering Characterization” (N.M. Wasiuddin, W.B. Hamid, M. Zaman and R.W. Nairn). CD ROM Publication (07-3193), 86th Annual TRB Meeting, Jan. 21-25, 2007, Washington, D.C.
  71. ²Engineering Behavior and Microstructure of Soil Stabilized with Cement Kiln Dust² (P. Solanki, N. Khoury and M. Zaman). Geo-Denver 2007 Conf., February 18-21, 2007, Denver, Colorado.
  72. ²Optimizing Aggregate Base Gradation for Maximum Performance² (N. Khoury, M. Zaman, R.W. Nairn and J.G. Laguros). Int’l Conf. on Advanced Characterization of Pavement and Soil Engineering Materials, June 20-22, 2007, Athens, Greece (8 pages).
  73. Wasiuddin, N.M., Zaman, M., Nairn, R.W., and Kolothody, N., “Characteristics of Chat-Asphalt for Road Base Application” (N.M. Wasiuddin, M. Zaman, R.W. Nairn and N. Kolothody). 21st International Conf. on Solid Waste Tech. & Management, Philadelphia, Pennsylvania, March 26-29, 2006, pp. 333-342.
  74. “Acid-Base Characteristics of an Asphalt Binder with and without Anti-Strip Additives” (N.M. Wasiuddin, D.C. Howell, C.M. Fogle, M. Zaman and E.A. O’Rear). Airfield and Highway Pavements Specialty Conf., ASCE,Atlanta, Georgia, April 30-May 3, 2006, pp. 412-424.
  75. “Performance-Grade Changes in PG 64-22 Binder due to Selected Additives” (S. Selvamohan, M. Zaman and G. Gierhart). Proc. 7th International Congress on Advances in Civil Engineering (ACE), Oct. 11-13, Yildiz Tech. Univ., Istanbul, Turkey, Paper No. ACE 06-195, 2006 (8 pages).
  76. “Use of DMT for Subsurface Characterization: Strengths and Weaknesses” (H.-M. Lim, M. Zaman, and K. Hatami). Sec. Int. Conf. on Flat Dilatometer, Washington, D.C., April 2- 6, 2006, pp. 213-219, 2006.
  77. “Remediating and Recycling Lead Mining Waste in Oklahoma: The Use of Passive Treatment and Road Pavement Applications to Mitigate Environmental Hazards” (Nairn, R.W., Meo, M., Zaman, M., and Laguros, J.G.). (CD ROM) 9th Int. Conf. of Env. Science and Tech., held on Sept. 1-3 at Rhodes Island, Greece, 2005 (6 pgs).
  78. “Using Raw Chat in Hot Mix Asphalt for Pavement Applications” (Wasiuddin, N.M., Hamid, W.B., Zaman, M., Nairn, R.W. and Landers, T.). 22nd Nat’l Mtg. of the Amer. Soc. of Mining & Rec., ASMR, held on June 19-23 at Lexington, KY, 2005, CD ROM Publication (15 pgs).
  79. “Assessment of Surface Free Energy Characteristics of Performance Graded Asphalt Binders” (Wasiuddin, N.M., Barraza, H.J., Zaman, M. and O’Rear, E.A.). Geotechnical Special Publication No. 130-142, Geo-Frontiers, ASCE Conf. , held on Jan. 24-26 at Austin, Texas, 2005, pp. 151-163.
  80. “Performance of Stabilized Aggregate Beams Under Freeze-Thaw Cycles” (Khoury, N. and Zaman, M.). Proc. (CD ROM) Transp. Research Board 84th Annual Meeting, held on January 12-16 at Washington, D.C., 2005 (24 pgs).
  81. “Behavior of Stabilized Aggregate Bases Subjected to Cyclic Loading and Wet-Dry Cycles” (Khoury, N., Zaman, M. and Laguros, J.G.). Geotechnical Special Publication No. 130-142, Geo-Frontiers, ASCE Conf., held on Jan. 24-26 at Austin, Texas, 2005, pp. 61-70.
  82. “Using RAP Materials for Overlay: Laboratory and Field Study” (Zaman, M. , Tarefder, R. and Cheong, T.). 11th Int. Conf of IACMAG (Invited Paper) held on June 19-24 at Turin, Italy, Vol. 4, 2005, pp. 71-88.
  83. “Influence of Metric Suction on the Resilient Modulus of Kirkland Soil Series in Oklahoma” (Khoury, N. and Zaman, M.). 11th International Conf of IACMAG, held on June 19-24 at Turin, Italy, Vol. 2, 2005, pp. 81-88.
  84. “Characterizing Resilient Behavior of Asphalt Concrete for Use in Pavement Design” (Tarefder, R.A. and Zaman, M.). ASCE Geo-Trans Conf., held in Los Angeles, California on July 27-31, 2004.
  85. “Fluidized Bed Ash as a Stabilizing Agent for Roadway Base Materials” (Pandey, K.K., Zaman, M. and Laguros, J.G.,). ASCE Texas Section Fall Meeting, held at Houston, Texas, on September 29 – Oct. 2, 2004 (24 pgs).
  86. “Performance of Stabilized Base under Flexural and Compressional Cyclic Loading” (Khoury, N., Srour, C. and Zaman, M.). Proc. (CD ROM) of Geo-Trans, ASCE Geo-Institute Conf. held July 27-31 at Los Angeles, California, 2004 (10 pgs).
  87. “The Use of XRD Patterns to Evaluate the Compressive Strength of Stabilized Aggregates” (Khoury, N., Zaman, M. and Laguros, J.G.).Advances in X-Ray Analysis, held on August 4-8, 2003, Denver, Colorado, Proc. Published in 2004 (6 pgs).
  88. Tarefder, A. and Zaman, M., “Design and Evaluation of Neural Networks for Rutting of Asphalt Concrete.” ASCE Conf. on Computational Intelligence held on October 20-22 at Baltimore, MD, pp. 38-48, 2004.
  89. “Evaluation of Rutting Potential in Asphalt Mixes using Finite Element Modeling” (Pirabarooban, S., Zaman, M. and Tarefder, R.A.). Annual Conf. of the Transp. Assoc. of Canada. Held on September 21-23, 2003 in Newfoundland, Canada (10 pgs).
  90. “Correlating Asphalt Concrete Modulus with Rut Potential” (Tarefder, R.A. and Zaman, M.). Third International Symp. on Maintenance and Rehabilitation of Pavements and Technological Control, held on July 7-10, 2003 in Portugal, Vol. 1, pp. 207-217.
  91. “The Use of XRD Patterns to Evaluate the Compressive Strength of Stabilized Aggregates” (Khoury, N., Zaman, M. and Laguros, J.G.).Advances in X-Ray Analysis, held on August 4-8, 2003, Denver, Colorado )6 pgs).
  92. “2-D and 3-D Modeling of Rutting in Asphalt Pavement” (Zaman, M., Pirabarooban, S. and Tarefder, R.A.). Int. Conf. on Highway Pvt. Data, Analysis and Mechanistic Design Applications, held on Sept. 7-10, 2003 in Columbus, Ohio (11 pgs).
  93. “Virtual Laboratory Modules for Undergraduate Strength of Materials Course” (A.R. Kukreti, M. Zaman, K. Gramoll and J.-H. Lee). ASEE 2002 Annual Conf. & Exhibition, held at New Mexico.
  94. “Evaluation of Relative Weight of Rutting Parameters” (R. Tarefder, M. Zaman and K. Hobson). of Canadian Technical Assoc. Held in Calgary, Canada, Nov. 2002.
  95. “An Application of the Dual-Porosity Porothermoelastic Approach in Naturally Fractured Porous Media” (R. Nair, Y. Abousleiman and M. Zaman). 2nd Biot Conf. on Poromechanics, held at Grenoble, France, Aug. 26-28, 2002, pp. 509-514.
  96. “DSC-Based Constitutive Modeling of High Performance Concrete” (M. Zaman, A.R. Kukreti and M.P. Chin). 14th US National Congress of Theoretical and Applied Mech., held in Blacksburg, Virginia, June 23-28, 2002, pp. 392-393.
  97. “Evaluating Rut Potential of Selected Asphalt Mixes for Improved Pavement Performance” (R. Tarefder and M. Zaman). CD Proc. Second Int. Conf. On Maintenance and Rehabilitation of Pavements and Technological Control, held at Auburn, Alabama, July 29-Aug. 1, 2001.
  98. “Numerical Analysis of Fluid Flow in Naturally Fractured Media” (K. Xia, M. Zaman and M. Bai). 10th IACMAG Intl. Conf., held in Tucson, Arizona Jan. 7-11, 2001, pp. 1815-1822.
  99. “Expert System for Evaluation of Groundwater Pollution Potential from CAFO.” (A.N.M. Ahsanuzzaman, K. Strevett, and M. Zaman). 10th IACMAG Intl. Conf., held in Tucson, AZ, Jan. 7-11, 2001, pp. 183-190.
  100. “Analysis of Consolidation Including Sand Drain” (with A. Alvappillai).John Booker Memorial Symp., held in Sydney, Australia, Nov. 16-17, 2000 (13 pgs).
  101. “Computer-Based Learning Modules for Rigid Body Mechanics” (with A.R. Kukreti). Proc. (CD-ROM) 2000 ASEE Annual Conf., held at St. Louis, Missouri, June 18-21, 2000 (10 pgs).
  102. “Predicting the Performance of Pavement Drainage Systems Using a Neural Network Model” (with A.F. Alam, K. Muraleetharan, and S. Sudharsanan). Proc. (CD-ROM) EM 2000, Fourteenth Engineering Mech. Conf., held at Univ. of Texas at Austin, 2000 (5 pgs).
  103. “Porothermoelastic Solutions for an Inclined Borehole in Transversely Isotropic Porous Media” (with S. Ekbote and Y. Abousleiman). Fourth North American Rock Mech. Symp. Pacific Rocks 2000. Held at Seattle, Washington, July 31-Aug. 3, 2000, pp. 253-259.
  104. “Finite Element Modeling of an Inclined Wellbore in a Fractured Porous Medium Saturated with Oil and Gas” (with R. Nair, M. Bai, and Y. Abousleiman). Fourth North American Rock Mech. Symp. Pacific Rocks 2000. Held at Seattle, Washington, July 31-Aug. 3, 2000, pp. 189-196.
  105. “Modeling the 85th Percentile Speed on Oklahoma Two-Lane Rural Highways via Neural Network Approach” (with R. Issa and Y. Najjar).2nd Intl. Workshop on Artificial Intelligence and Math. Methods in Pavements and Geomech. Systems. Held at Univ. of Delaware, Aug. 11-12, 2000, pp. 99-108.
  106. “Teaching Rigid Body Mechanics Using Laptop Computers in the Classroom Versus the Traditional Way” (M. Zaman and A.R. Kukreti).34th ASEE Midwest Section Conf. (Electronic Pub.), held in Stillwater, Oklahoma, April 14-16, 1999 (10 pages).
  107. “A Software for Poroelastic Analyses of Borehole Stability” (L. Cui, Y. Abousleiman, S. Ekbote, J.-C. Roegiers, and M. Zaman). SPE 54013, SPE Latin American and Caribbean Petroleum Eng. Conf., Caracas, Venezuela, April 21-23, 1999 (8 pages).
  108. “Time-Dependent Coupled Processes in Wellbore Design and Stability: PBORE-3D” (Y. Abousleiman, S. Ekbote, L. Cui, F. Mody, J.-C. Roegiers, and M. Zaman), SPE 56759, SPE Annual Technical Conf. and Exhibition, Houston, Texas, Oct. 3-6, 1999 (10 pages).
  109. “Constitutive Properties of Rocks Under Dry and Saturated Conditions” (A.R. Kukreti and M. Zaman). Plasticity 1999 Symp., held in Cancun, Maxico, Sept. 1999 (4 pages).
  110. “Analysis of Model Continuously Reinforced Concrete Pavement Using FLAC” (M. Zaman and A. Soltani). Int. FLAC Symp. On Numerical Modeling in Geomech., held in Minneapolis, Minnesota, Sept. 1-3, 1999, pp. 197-202.
  111. “Estimating Resilient Modulus of Aggregate Base by Backpropagation Neural Network Model” (R. Issa and M. Zaman). 4th Int. Conf. on Constitutive Laws for Engineering Materials, held at RPI, Troy, New York, July 27-30, 1999, pp. 493-496.
  112. “A Neural Network Model for Pavement Drainage Systems” (K. Muraleetharan, A. Alam, S. Sudharsan, and M. Zaman). 4th Int. Conf. on Constitutive Laws for Engineering Materials, held at RPI, Troy, New York, July 27-30, 1999, pp. 489-492.
  113. “A Neural Network Model for a Cohesionless Soil” (M. Zaman and J.-H. Zhu). Int. Workshop on Artificial Intelligence and Math. Methods in Pavement and Geomechanical Sys., held at Florida Atlantic Univ., Miami, Nov. 5-6, 1998, pp. 39-54.
  114. “Foundation Analysis with Deformable Particles Using DDA” (K. Shyu, M.R. Salami and M. Zaman). Ninth IACMAG Conf., held in Wuhan, P.R.C., Nov. 2-7, 1997, pp. 469-472.
  115. “Vibration Characteristics of Foundation Slabs on a Two-Parameter Elastic Medium” (M. Zaman, M.O. Faruque, A. Agrawal, W. Low, and J.G. Laguros). Proc. ASCE Special Publ. No. 64: Observation and Modeling in Numerical Analysis and Model Tests in Dynamic Soil-Structure Interaction Problems, 97’ASCE Geo Institute Conf., held in Logan, Utah, July 16-19, 1997, pp. 122-137.
  116. “Physical and Numerical Modeling of Multiple Fracturing Under Tension in a Continuously Reinforced Concrete Slab” (A. Soltani, M. Zaman, and L. Ring). Of Ninth IACMAG Conf., held in Wuhan, P.R.C., Nov. 2-7, 1997, pp. 413-419.
  117. “Influence of Testing Procedure on Resilient Modulus of Aggregate Materials” (P. Tian, M. Zaman, and J.G. Laguros). Of Ninth IACMAG Conf., held in Wuhan, P.R.C., Nov. 2-7, 1997, pp. 795-800.
  118. “Characterization of Ground Subsidence of Abandoned Mines” (Y. Najjar, M. Zaman, J.L. Ahern, and J.G. Laguros). Int. Conf. On Innovation in Computer Methods for Civil and Structural Engineering, held in Cambridge, England, Aug. 19-21, 1997, pp. 23-30.
  119. “Minimizing Numerical Oscillation in the Consolidation Analysis” (M. Bai, J.-C. Roegiers, M. Zaman, and D. Elsworth). NUMOG VI:Numerical Models in Geomechanics, held in Montreal, Canada, July 2-4, 1997, pp. 359-354.
  120. “Constitutive Modeling of Weak Rocks With Application to Reservoir Compaction” (M. Zaman, A. Abdulraheem, Y. Abousleiman, and J.-C. Roegiers). Plasticity’97:The Sixth Int. Symp. On Plasticity and Its Current Applications, held in Juneau, Alaska, July 14-18, 1997, pp. 333-334.
  121. “Coupling of Constitutive and Permeability Rock Models in a Flow Simulator” (A.R. Kukreti, M. Zaman, and L. Ring). Plasticity’97:The Sixth Int. Symp. On Plasticity and Its Current Applications, held in Juneau, Alaska, July 14-18, 1997, pp. 313-314.
  122. “Multiaxial Testing and Constitutive Modeling of Coal” (M. Zaman, D.-H. Chen, and Y.M. Najjar). Ninth IACMAG Conf., held in Wuhan, Nov. 2-7, 1997, pp.285-292.
  123. “Field Evaluation of Pavement Drainage” (M. Zaman, M. Rahman, and K. Muraleetharan). Int. Conf. On Rehabilitation and Development of Civil Eng. Infrastructure Systems, held in Beirut, Lebanon, June 9-11, 1997, pp. 600-618.
  124. “Neuronets: On Theory and Practice in Civil Engineering” (M. Knaj, J.-C. Roegiers, and M. Zaman). Int. Conf. On Rehabilitation and Development of Civil Engineering Infrastructure Systems, held in Beirut, Lebanon, June 9-11, 1997, pp. 1258-1269.
  125. “Prediction of Shear Stress-Strain Behavior of Soil with Recurrent Neural Network” (J.H. Zhu, M. Zaman, and T.B. Trafalis). Artificial Neural Networks in Engineering (ANNIE’96), Vol. 6, Smart Engineering Systems: Neural Networks, Fuzzy Logic and Evolutionary Programming, held in St. Louis, Missouri, Nov. 10-13, 1996, pp. 809-814.
  126. “Free Vibration Analysis of Rectangular Plates Resting on a Two-Parameter Elastic Medium” (M. Zaman, M.O. Faruque, A. Agrawal, and J.G. Laguros). First International Conf. On Earthquake Resistent Design of Engineering Structures, ERES 96, held in Greece on Oct. 30-Nov. 1, 1996, Vol. 2, pp. 583-592.
  127. “Permeability Measurements Under Different Stress Paths for a Weakly Cemented Sandstone” (G. Krishnan, M.M. Zaman, and J.-C. Roegiers).NARMS’96, held in Montreal, Canada, June 19-21, 1996, pp. 1011-1017.
  128. “Development of a Coupled Constitutive-Flow Rock Model for Indiana Limestone” (A.R. Kukreti, M.M. Zaman, and P. Suri). NARMS’96, held in Montreal, Canada, June 19-21, 1996, pp. 1305-1313.
  129. “A Phenomenological Creep Model for Rocksalt” (M. Zaman, M.O. Faruque, and M.W. Wei). Developments in Theoretical and Applied Mech., Vol. XVIII, Univ. of AL, Tuscaloosa, 1996, pp. 237-248.
  130. “Nonlinear Analysis of Underreamed Shafts” (M. Zaman, I. Houssamy, and R.M. Salami). 1st Int’l Forum on DDA & Simulations of Discont.Media, held in Berkeley, CA, June 12-14, 1996, pp. 586-595.
  131. “Determining Contact Stresses on Potatoes Stored in Bulk Bins by Using Discontinuous Deformation Analysis” (M.R. Salami, A. Shahbazi, M. Zaman, and M. Zargham). First Int’l Forum on DDA and Simulations of Discontinuous Media, held in Berkeley, California, June 12-14, 1996, pp. 415-431.
  132. “Discontinuous Deformation Analysis Using the Third Order Displacement Function” (M.Y. Ma, M. Zaman, and J.H. Zhu). First Int’l Forum on DDA and Simulations of Discontinuous Media, held in Berkeley, California, June 12-14, 1996, pp. 383-394.
  133. “Modeling Stress-Strain Behavior and Determination of Material Parameters of Rocks for a Plasticity Model” (P. Suri, A.R. Kukreti, M. Zaman and J.-C. Roegiers). Fifth International Symp. on Plasticity and Its Current Applications, held at Osaka, Japan, July 17-21, 1995, (4 pages).
  134. “Cyclic Testing of Aggregate for Pavement Design” (M.M. Zaman, D.-H. Chen, and J.G. Laguros). Third Int’l Conf. on Recent Advances in Geotechnical Earthquake Engr., held in St. Louis, Missouri, April 2-7, 1995, Vol. I, pp. 53-56.
  135. “Object-Oriented Programming Aspects of the SITEX System” (M. Kanj, M. Zaman and J.-C. Roegiers). 3rd Int. Conf. on Comp. Met. and Water Resources, held in Beirut, Lebanon, Sept. 25-28, 1995, pp. 383-390.
  136. “Highlights from the Knowledge-Base of a Sanding Advisor Called SITEX” (M. Kanj, M. Zaman and J.-C. Roegiers). 3rd Int. Conf. on Comp. Met. and Water Resources, held in Beirut, Lebanon, Sept. 25-28, 1995, pp. 391-398.
  137. “Using a Finite Element Program ABAQUS in Predicting the Cooling Rates of Hot Mix Asphalt” (D.H. Chen, M. Zaman, Y. Mehta and J.G. Laguros). NUMOG V Symp., to be held at Davos, Switzerland, Sept. 6-8, 1995, pp. 663-666.
  138. “Numerical Modeling for Assessment of Cooling Rates of Hot Mix Asphalt Overlays” (D.H. Chen, Y. Mehta, M.M. Zaman, J.G. Laguros and L. Senkowski). Sixth Int. Conf. on Civil and Struct. Eng. Computing, held at Cambridge, England, August 28-30, 1995, pp. 105-108.
  139. “Mechanistic-Empirical Methodology for Conventional Flexible Pavement Design (D.H. Chen, M. Zaman and J.G. Laguros). Sixth Int. Conf. on Civil and Struct. Eng. Computing, held at Cambridge, England, August 28-30, 1995, pp. 191-194.
  140. “Behavior of Natural and Remolded Antler Sandstone: Sample Preparation and Grain Crushing Aspects” (H. Wang, G. Krishman, M. Zaman, and J.-C. Roegiers). 35th U.S. Rock Mech. Symp., held at Lake Tahoe, June 4-7, 1995, pp. 127-133.
  141. “Stress-Dependent Permeability Measurement Using the Pulse Technique” (P. Suri, M. Azeemuddin, M. Zaman, A.R. Kukreti and J.-C. Roegiers). 35th U.S. Rock Mech. Symp., held at Lake Tahoe, June 4-7, 1995, pp. 645-650.
  142. “Assessment of Distress Models for Prediction of Pavement Service Life” (D.H. Chen, M. Zaman and J.G. Laguros). ASCE Specialty Conf. on Infrastructure: New Materials and Methods for Repair, held at San Diego, California, Nov. 14-16, 1994, 8 pgs.
  143. “Bonded Aggregate Base-Pavement-Subgrade Interaction” (M. Zaman, R. Radhakrishnan, and J.G. Laguros). Advances in Simulation and Interaction Techniques, Edited by M. Papadrakakis and H.V. Topping, 1994, pp. 67-72.
  144. “Numerical Modeling of Bridge Approach Settlement with Foundation-Embankment Interaction” (M. Zaman, D. Bhat and J.G. Laguros). ASCE Geotechnical Special Publ. No. 40, of Settlement 94 Conf. held at College Station, Texas, June 16-18, 1994, Vol. 2, pp. 1400-1414.
  145. “Acoustic Velocity Anisotropies in Cordoba Cream Limestone During Different Deformational Stress Paths” (M. Azeemuddin, T.E. Scott, Jr., M. Zaman, and J.-C. Roegiers). NARMS-94 Symp., held in Austin, Texas, June 1-3, 1994, NARMS-94, pp. 775-782.
  146. “Pore collapse Mechanisms in Cordoba Cream Limestone” (S. Mowar, M. Zaman, D.W. Stearns and J.-C. Roegiers). NARMS-94 Symp., held in Austin, Texas, June 1-3, 1994, pp. 767-773.
  147. “Constitutive Modeling of Sand: A Comparative Study” (Y.M. Najjar, M.M. Zaman and R. Tabbaa). IACMAG-94 Conf., held at Morgantown, West Virginia, May 22-28, 1994, Vol I, pp. 641-646.
  148. “Wellbore Stability in a Transversely Isotropic Medium” (D. Gupta and M. Zaman). IACMAG-94 Conf., held at Morgantown, West Virginia, May 22-28, 1994, Vol. III, pp. 2065-2070.
  149. “Statistical Modeling of Bridge Approach Settlement” (R. Jha, M. Zaman, J.G. Laguros and J. Nevels). IACMAG-94 Conf., held at Morgantown, West Virginia, May 22-28, 1994, Vol. II, pp. 1489-1494.
  150. “Effective Stress Creep Model for Rock Salt” (M.I. Hossain, M. Zaman and M.O. Faruque), IACMAG-94 Conf., held at Morgantown, West Virginia, May 22-28, 1994, Vol. III, pp. 2253-2258.
  151. “3-D Testing and Constitutive Modeling of Inherently Anisotropic Sand” (D.H. Chen, M. Zaman and A. Oyesanya), in Theoretical and Applied Mech. (Proc. SECTAM-94), Vol. XVII, 1994, pp. 400-414.
  152. “Numerical Evaluation of Bridge Approach Settlement” (M. Zaman, D. Bhat and J.G. Laguros). Impact of Computational Mech. to Engr. Probs., Sydney, Australia, Aug. 2, 1993, pp. 175-182.
  153. “On Developing an Expert System for Sand Control” (M. Kanj, M. Zaman and J.-C. Roegiers). , 7th Oklahoma Symp. on Artificial Intelligence, held in Stillwater, Nov. 18-19, 1993 (7 pgs.).
  154. “Computer Aided Analysis of Nonlinear Consolidation” (D. Bhat, M. Zaman and J. Laguros). , 13th Annual ASME Int. Mtg. on Computer Engg., held in San Diego, California, Aug. 8-11, 1993, pp. 515-523.
  155. “Application of Nonlinear Finite Element Method in Prediction of Ground Subsidence” (Y. Najjar, D.H. Chen and M. Zaman). , First Canadian Symp. on Numerical Modelling and Applications in Mining and Geomech., March 27-30, 1993, pp. 140-149.
  156. “A FE Model for Ekofisk Field Subsidence” (A. Abdulraheem, M. Zaman and J.-C. Roegiers). Composite Material Technology, PD-Vol. 53, ASME, 1993, pp. 103-110.
  157. “Characterization of Volumetric Response in Sands” (M. Zaman, M.O. Faruque and A. Abdulraheem). , 4th International Symp. on Plasticity and Its Current Applications, held in Baltimore, Maryland, July 19-23, 1993 (4 pgs.).
  158. “Anisotropic Constitutive Model for Pressure Sensitive Materials” (Y.M. Najjar, M. Zaman and D.H. Chen). , 4th International Symp. on Plasticity and Its Current Applications, held in Baltimore, Maryland, July 19-23, 1993 (4 pgs.).
  159. “Numerical Modeling of Mining Induced Subsidence” (M. Zaman, A.R. Kukreti and D.H. Chen). , 2nd Asian-Pacific Conf. on Computational Mech., held in Sydney, Australia, Aug. 3-6, 1993, Vol. I, pp. 521-526.
  160. “Constitutive Modeling of Geomaterials and Interfaces/Joints Including Recent Concepts, Localization, Stability and Micromechanics” (C.S. Desai and M. Zaman). Proc., S.-Canada Workshop Proceedings: Recent Accomplishments and Future Trends in Geomechanics in the 21st Century” Proceedings published in November, 1993, pp. 39-46.
  161. “Expert Systems in Transportation Engineering” (M. Zaman, G. Bozai, et. al.). 3rd Int’l. Conf. on the Applications of AI of Civil and Structural Eng., held at Edinburgh, U.K., Aug. 17-19, 1993, pp. 183-188.
  162. “FE Modeling of Pavement Joints for Dynamic Analysis” (A. Alvappillai and M. Zaman). Contact Mechanics 93, held at Southhampton, U.K., July 13-15, 1993, pp. 509-518.
  163. “Numerical Simulation of a Compacting Reservoir” (A. Abdulraheem, M. Zaman and J.-C. Roegiers). 34th U.S. Symp. on Rock Mech., held at Madison, Wisconsin, June 27-30, 1993, pp. 475-478. (Revised version published in IJRMMS Journal).
  164. “Numerical Modeling of Ground Subsidence due to Mining” (Y.M. Najjar and M. Zaman). 34th U.S. Symp. on Rock Mech., held at Madison, Wisconsin, June 27-30, 1993, pp. 737-740. (Revised version published in IJRMMS Journal).
  165. “Dynamic Testing of Aggregate Bases” (D.H. Chen, M. Zaman and J.G. Laguros). 6th Int’l. Conf. on Soil Dyn. and Earthquake Engr., held at Southhampton, U.K., June 14-16, 1993, pp. 259-274.
  166. “Recent Expert System in Well Completion and Stimulation” (M. Kanj, M. Zaman and J.-C. Roegiers). 6th Int’l. Conf. on Industrial and Engr. Applications of Artificial Intelligence and Expert Systems, held at Edinburgh, U.K., June 1-4, 1993, pp. 441-449.
  167. “Laboratory Testing and Constitutive Modeling of Coal Including Anisotropy” (D.H. Chen, M. Zaman and A.R. Kukreti). Materials Research Society Fall Mtg./ held at Boston, Nov. 30 – Dec. 4, 1992 (Proc. published in 1993), pp. 349-354.
  168. “Application of Nonlinear Finite Element Method in Prediction of Ground Subsidence due to Underground Mining” (Y.M. Najjar, D.H. Chen and M. Zaman). Canadian Symp. on Num. Modeling Application in Mining and Geomech., held on March 27-30, 1993, Montreal, Canada, pp. 140-149.
  169. “A FE Model for Ekofisk Subsidence” (A. Abdulraheem, M. Zaman and J.C. Roegiers). Composite Material Technology, The Energy-Sources Technology Conference and Exhibition, held at Houston, Texas, Jan. 31-Feb. 3, 1993, pp. 103-110.
  170. “Pore Collapse Behavior of Cordoba Cream Lime Stone” (M. Azeemuddin, M. Zaman, J.-C. Roegiers and S. Mowar). 4th Int. Symp. on Numerical Models in Geomech. (NUMOG IV), held in Swansea, U.K., Aug. 24-27, 1992, pp. 291-300.
  171. “Mechanics of Pore Collapse and Compaction in Weak Porous Rocks” (A. Abdulraheem, J.-C. Roegiers, and M. Zaman). 33rd U.S. Symp. on Rock Mechanics, held at Santa Fe, New Mexico, June 3-5, 1992, pp. 233-242.
  172. “Dynamic Response of Concrete Airport Pavements to Temperature Induced Warping” (M.R. Taheri, M. Zaman and V. Khanna). SECTAM XVI Conf., held at Nashville, Tennessee, April 12-14, 1992, pp. II.10.17 – II.10.26.
  173. “Pore Collapse in Weakly Cemented and Porous Rocks” (M. Zaman, J.-C. Roegiers, A. Abdulraheem and M. Azeemuddin). Composite Material Technology, The Energy-Sources Technology Conference and Exhibition, held at Houston, Texas, Jan. 26-30, 1992, pp. 123-132.
  174. “Soil Stabilization Using Cement Kiln Dust” (M. Zaman, A. Sayah and J.G. Laguros). 7th Int. Conf. on Expansive Soils, held in Dallas, Texas, Aug. 3-5, 1992, pp. 347-351.
  175. “Behavior of Building Foundations on Expansive Soil: A Case Study” (M. Zaman and J.G. Laguros). World Building Congress, held in Montreal, Canada, 18-20 May, 1992, Vol. I, pp. 206-207.
  176. “Modeling Creep Behavior of Rock Salt” (M. Zaman, M.O. Faruque, and M.I. Hossain). Composite Material Technology, PD-Vol. 45, The Energy-Sources Technology Conference and Exhibition, held at Houston, Texas, Jan. 26-30, 1992, pp. 51-56.
  177. “Application of Expert Systems in Transportation Engineering: A Critical Review” (M. Zaman, G. Bozai, A.S. Mangaokar, J.F. Harp, J.L. Gattis and J.G. Laguros). Fifth Okla. Symp. on Artificial Intelligence, held in Norman, Nov. 20-22, 1991, pp. 57-63.
  178. “Constitutive Modeling of Concrete for Nuclear Reactor Application” (Y.M. Najjar and M. Zaman). SMiRT-11 Conf., held in Japan, Aug. 18-23, 1991 (6 pages).
  179. “A Constitutive Model to Characterize Dilatancy in Rocks” (J.-C. Roegiers, M. Zaman, A. Abdulraheem and M. Azeemuddin). 32nd U.S. Rock Mech. Symp. held in Norman, Oklahoma 10-12 July, 1991, pp. 531-538.
  180. “Circular Plate-Elastic Halfspace Interaction Analysis Including Transverse Shear Deformation” (M.O. Faruque, A. Mahmood and M. Zaman). IACMAG-91 Conf., held in Australia in May 1991, Vol. II, pp. 1147-1152.
  181. “Constitutive Modeling of Pueblo Sand” (M. Zaman and M.O. Faruque).IACMAG – 91 Conf., held in Australia in May 1991, Vol. I, pp. 709-714.
  182. “Influence of Back-Fill Soil Properties on Behavior of Buried Pipes.”ASCE Conf. on Pipeline Crossings, held in Denver, Colorado, March 26-27, 1991, pp. 129-138.
  183. “Dynamic Response of Square and Rectangular Foundations on Two-Parameter Elastic Medium” (A. Alvappillai, M. Zaman and M.O. Faruque). Second Int. Conf. on Geotech. Earthq. Engrg. and Soil Dyn., held at St. Louis, Missouri, March 11-15, 1991, Vol. I, pp. 679-684.
  184. “Constitutive Model for Cohesionless Soil” (M.O. Faruque, M. Zaman and A. Abdulraheem). 3rd Int. Conf. on Const. Laws for Engrg. Materials, held at Tucson, Arizona, Jan. 7-11, 1991, pp. 123-127.
  185. “A High Capacity Cubical Device and Multi-Axial Testing for Constitutive Modeling of Concrete” (A.R. Kukreti, M. Zaman and D.K. Mishra). 3rd Int. Symp. on Plasticity, held in France, August 1991 (4 pages).
  186. “Evaluation of Hierarchical Models Using Pueblo Sand Data” (M. Zaman, M.O. Faruque and R. Tabbaa). 3rd Int. Conf. on Const. Laws for Engrg. Materials, held at Tucson, AZ, Jan. 7-11, 1991, pp. 787-791.
  187. “A Thermo-Mechanical Creep Constitutive Model for Metals with Application” (M.O. Faruque and M.M. Zaman). Thirteenth Annual Energy-Sources Tech. Conf. (Composite Material Technology), New Orleans, Louisiana, Jan. 14-18, 1990, PD-Vol. 32, pp. 173-176.
  188. “Predicting Behavior of Buried Pipes Using a Mixed Finite Element Approach” (M. Zaman and J.G. Laguros). Conf. on Flexible Pipes, held at Columbus, Ohio, Oct. 22-24, 1990, pp. 163-169.
  189. “A Mixed Variational Approach for Analysis of Axisymmetric Plates on Elastic Halfspace” (M.O. Faruque, M.M. Zaman and M.R. Taheri). 3rd Iranian Congress, held in Shiraz, Iran, May 14-16, 1990, (18 pgs).
  190. “Dynamic Response of Bridges to a Moving Mass Load: Structural Impedance and Finite Element Methods” (M.R. Taheri and M.M. Zaman). Third Iranian Congress, held in Shiraz, Iran, May 14-16, 1990, (19 pgs).
  191. “Analysis of Consolidation Settlements of Two Bridge Approaches in Oklahoma” (A. Gopalasingam, M.M. Zaman and J.G. Laguros). Fifth Int. Symp. on Numerical Methods in Engr., held in Lausanne, Switzerland, Sept. 11-15, 1989, pp. 401-408.
  192. “Seismic Response of Nuclear Reactors in Layered Liquefiable Soil Deposits Including Nonlinear Soil-Structure Interaction” (M.M. Zaman and S.M. Mamoon). 10th Int. Conf. on Structural Mech. in Reactor Technology, held in Anaheim, California, Aug. 14-18, 1989, Vol. K1, pp. 199-204.
  193. “An Improved Two-Surface Plasticity Model for Concrete and Rocks Subject to Three-Dimensional Loading” (M.M. Zaman, A.R. Kukreti and Y.M. Najjar). Second Int. Symp. on Plasticity and Its Current Applications, held at Mie University, Japan, 1989, pp. 47-50.
  194. “Prediction of Surface Subsidence Caused by Underground Mining Using a Nonlinear Finite Element Procedure” (Y.M. Najjar, M.M. Zaman and J.L. Ahern). 3rd Int. Symp. on Numerical Models in Geomechanics (NUMUG III), held in Niagara Falls, Canada, May 8-11, 1989, pp. 557-565.
  195. “Stability Analysis and Characterization of Ground Subsidence of Abandoned Lead-Zinc Mines in Northeastern Oklahoma” (M.M. Zaman, J.L. Ahern and Y.M. Najjar). 30th U.S. Symposium on Rock Mechanics, held in Morgantown, West Virginia, June 19-22, 1989, pp. 707-714.
  196. “Creep Response of Aluminum 2618-T61 Under Multiaxial Loading” (M.M. Zaman, I.U. Mahmood and M.O. Faruque). ASME Winter Annual Mtg., Chicago, IL, Nov. 28-Dec. 2, 1988, PVP Vol. 153, pp. 61-67.
  197. “Effect of Loading Sequence and Soil Nonlinearity on the Response of a Pile Group Foundation Using a Three-Dimensional Finite Element Analysis” (Y.M. Najjar and M.M. Zaman). 6th Int. Conf. on Numerical Methods in Geomechanics, held in Austria, April 11-15, 1988, Vol. 2, pp. 1127-1134.
  198. “Simulation of Drilled Pier Behavior Under Three-Dimensional Loading” (M.M. Zaman and I. Houssamy). Second Int. Conf. on Case Histories in Geotechnical Engineering, held in St. Louis, Missouri, June 1-5, 1988, Vol. II, pp. 1505-1508.
  199. “Reliability of Constitutive Parameter for a Soil Obtained from Laboratory Test Data” (M.M. Zaman, A. Honarmandebrahimi and J.G. Laguros). 6th Int. conf. on Numerical Methods in Geomechanics, held in Austria, April 11-15, 1988, Vol. 3, pp. 2001-2008.
  200. “Significance of Testing Procedure and Equipment on Determination of Constitutive Parameters for Soil” (A. Honarmandebrahimi and M.M. Zaman). Int. Conf. on Numerical Methods in Eng.: Theory and Applications, held at Swansea, England, July 6-10, 1987, Vol. 2, pp. c18/1-8.
  201. “Earthquake Response of Bridge Piers with Base Isolators and Energy Dissipators” (M.M. Zaman, J.G. Laguros and M.P. Ardhanareeswaran).5th Canadian Conf. on Earthquake Engineering, held at Ottawa, Canada, July 6-8, 1987, pp. 427-434.
  202. “A Finite Element Model for Simulation of Field Load Test of a Drilled Shaft” (M.M. Zaman and A.I. Uppal). Second Int. Conf. on Constitutive Laws for Engineering Materials: Theory and Practice, held at Tucson, Arizona, Jan. 5-10, 1987, Vol. II, pp. 1129-1136.
  203. “Effects of Soil-Structure Interaction on the Liquefaction Characteristics of a Site” (M.M. Zaman and S. Mamoon). 3rd U.S. National Conf. on Earthquake Eng., held at Charleston, South Carolina, Aug. 1986, pp. 541-552.
  204. “Stability of Underground Tunnels in Jointed Rocks Subjected to Blast Loading” (M.M. Zaman and M. Shah). Int. Symp. on Underground Mining, held at Univ. of Nottingham, Sept. 8-13, 1986, (10 pgs).
  205. “The Ultimate Capacity of Underreamed Drilled Piers by Finite Element Methods” (M.M. Zaman and A.I. Uppal). Southeastern Conf. on Theoretical and Applied Mech., held at Columbia, SC, April 17-18, 1986, pp. 469-475.
  206. “Simulation of Waterflooding in Heterogeneous, Compressible and Irregularly Shaped Reservoirs” ( A.R. Kukreti, M.M. Zaman, F. Civan, Y. Perera and G.C. Biswas). Int. Symp. on Variational Methods in Geosciences, held at Norman, Oklahoma, Oct. 15-17, 1985, pp. 279-284.
  207. “On the Modeling of Soil Liquefaction and Foundation Response by Finite Element Method” (M.M. Zaman and J.G. Laguros). Int. Symp. on Variational Methods in Geosciences, held at Norman, Oklahoma, Oct. 15-17, 1985, pp. 291-296.
  208. “Analysis of Cylindrical Structure-Foundation Interaction Using Variational Approach” (M.M. Zaman, A. Issa and I.U. Mahmood). 2nd Int. Conf. on Variational Methods in Engineering, held at the Univ. of Southhampton, July 17-19, 1985, pp. 12-3 to 12-12.
  209. “Evaluation of Liquefaction Potential of Earth Dams Under Cyclic Loading” (G.C. Biswas and M.M. Zaman). 2nd Int. Conf. on Soil Dyn. & Earthquake Eng., held on Board QE-2, June/July 1985, pp. 6-13 to 6-22.
  210. “Effects of Soil Liquefaction on Seismic Response of Nuclear Power Plants” (M.M. Zaman and G.C. Biswas). 8th Int. Conf. on Structural Mechanics in Reactor Technology, held in Brussels, Belgium, Aug. 19-23, 1985, Vol. B, Paper No. BK2/3, pp. 487-492.
  211. “Soil-Structure Interaction During Strong Motion for Bridge Piers with Base Isolators and Energy Dissipators” (M.P. Ardhanareeswaran, M.M. Zaman and L.R.L. Wang). 5th Int. Conf. on Numerical Methods in Geomechanics, held at Nagoya, Japan, 1985, pp. 851-866.
  212. “Evaluation of `Thin-Layer Element’ and Modelling of Interface Behavior in Soil-Structure Interaction.” 5th Int. Conf. on Numerical Methods in Geomech., held at Nagoya, Japan, 1985, pp. 1797-1803.
  213. “Rectangular Plate-Elastic Halfspace Interaction: An Energy Approach,”4th Int. Conf. on Applied Numerical Modeling, held at the National Cheng Kung Univ., Taiwan, Dec. 27-29, 1984.
  214. “Numerical Modelling of Pressuremeter Tests in Rocks with Inelastic Discontinuities.” 4th Int. Conf. on Applied Numerical Modelling, held at National Cheng Kung University, Taiwan, Dec. 27-29, 1984.
  215. “Influence of Interface Conditions on Dynamic Response of Axially Loaded Piles” (M.M. Zaman and S.L. Kuang). Int. Symp. on Dynamic Soil-Structure Interaction, held at the Univ. of Minnesota, Minneapolis, Sept. 4-5, 1984, pp. 75-83.
  216. “An Energy Method for Plate-Halfspace Interaction” (M.M. Zaman and M.O. Faruque). 5th ASCE EMD Specialty Conf., held at Laramie, Wyoming, Aug. 1984, Vol. 1, pp. 571-574.
  217. “The Measurement of Cyclic Interface Response” (E.C. Drumm, C.S. Desai and M.M. Zaman). 5th ASCE EMD Specialty Conf., held at Laramie, Wyoming, Aug. 1984, Vol. 2, pp. 1345-1348.
  218. “Response of Circular Subway Tunnels in Layered Discontinuous Geologic Media” (M.M. Zaman and S.L. Kuang). Southeastern Conf. on Theoretical and Applied Mech. (SECTAM XII), held in Callaway Gardens, Georgia, May 1984, Vol. 2, pp. 212-217.
  219. “Influence of Interface Behavior in Dynamic Soil-Structure Interaction” (C.S. Desai and M.M. Zaman). 8th World Conf. on Earthquake Engineering, held in San Francisco, July 1984, Vol. III, pp. 1049-1056.
  220. “Approximate Analysis of Uniformly Loaded Circular Plates on Isotropic Elastic Halfspace” (M.O. Faruque and M.M. Zaman). IX Congress, National Academy of Eng. of Mexico, Leon, Mexico, Sept. 1983, pp. 271-276.
  221. “Modelling of Interface Behavior in Dynamic Soil-Structure Interaction” (M.M. Zaman and C.S. Desai). Trans. 7th Int. Conf. on Structural Mech. in Reactor Tech. (SMiRT), Chicago, Illinois, Aug. 1983, Vol. K(b), pp. 33-41.
  222. “Modelling of In Situ Tests in Jointed Rocks” (M.O. Faruque and M.M. Zaman). of the Eighth Conf. on Electronic Computation, University of Houston, Houston, Texas, Feb. 1983, pp. 88-101.
  223. “Models for Sliding and Separation at Interfaces Under Static and Cyclic Loading” (M.M. Zaman and C.S. Desai). Int. Conf. on Constitutive Laws for Engineering Material: Theory and Applications. Univ. of Arizona, Tucson, Arizona, Jan. 1983, pp. 383-390.
  224. “An Algorithm for Determining Parameters for Cap Model from Raw Laboratory Test Data” (M.M. Zaman, C.S. Desai and M.O. Faruque). 4th Int. Conf. on Numerical Methods in Geomechanics, Edmonton, Canada, 1982, pp. 275-285.

Major Technical Reports

  1. Ghabchi, R., Zaman, M., Barman, Singh, D. V., and Boeck, D. (2015). “Fatigue Performance of Asphalt Pavements Containing RAS and RAP,” Final Report, Submitted to Oklahoma Department of Transportation, January 2015 (119 pages).
  2. Zaman, M., Pittenger, D. (2015), “Management of the ODOT Library: FFY 2015,” Annual Report submitted to ODOT (17 pages).
  3. Zaman, M. (2015), “Matching Support for the Southern Plains Transportation Center.” Annual Project Status Report: FFY2015, submitted to ODOT (48 pages).
  4. Commuri, S., Zaman, M., Barman, M., Nazari, M. and Imran, S. (2015), “Evaluation of Performance of Asphalt Pavements Constructed Using Intelligent Compaction Techniques.” Final report submitted to ODOT(SP&R No. 2246) (173 pages).
  5. Commuri, S., Zaman, M., Barman, M., Imran, S.A., Nazari, M. (2015). “Special Provisions for Intelligent Compaction of Stabilized Soil Subgrades” Annual Report for project ODOT SP&R 2160(A), SPTC 14.2-03, submitted to Southern Plains Transportation Center, September (40 Pages).
  6. Zaman, M., Commuri, S., Barman, M., Ghabchi, R., Singh, D. and Arshadi, A. (2015), “Recommended Fatigue Test for Oklahoma Department of Transportation.” Annual Project Report submitted to ODOT (SP&R #2243) (89 pages).
  7. Zaman, M., Pittenger, D. (2014), “Management of the ODOT Library: FFY 2014,” Annual Report submitted to ODOT (17 pages).
  8. Zaman, M. (2014). “Matching Support for the Southern Plains Transportation Center.” Annual report submitted to ODOT (Nov. 2014; 49 pages).
  9. Zaman, M., Commuri, S., Barman, M., Ghabchi, R. and Singh, D. (2014). “Recommended Fatigue Test for Oklahoma Department of Transportation.” Annual report. Submitted to Okla. Dept. of Transportation, (Oct. 2014, 80 pages).
  10. Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F. (2014). “Evaluation of Performance of Asphalt Pavements Constructed using Intelligent Compaction Techniques,” Final Report for project ODOT SP&R Item #2246, submitted to Oklahoma Department of Transportation (157 pages).
  11. Zaman, M., D.M. Pittenger, D.D. Gransberg, R. Bulut, S. Commuri (2014). “Develop Draft Chip Seal Cover Aggregate Specification Based on Aggregate Imaging System (AIMS) Angularity, Shape and Texture Test Results,” Oklahoma Department of Transportation, Final Report (122 pages).
  12. Zaman, M., Ghabchi, R., Singh, D., Barman, M. and Boeck, D.L. (2013). “Fatigue Performance of Asphalt Pavements Containing RAS and RAP.” Annual report. Submitted to Okla. Dept. of Transportation, Oct. 2013, 74 pages.
  13. Zaman, M., Commuri, S., Singh, D., Barman, M., Ghabchi, R. (2013). “Recommended Fatigue Test for Oklahoma Department of Transportation,”. Annual report. Submitted to Okla. Dept. of Transportation, Oct. 2013, 60 pages
  14. Zaman, M., Singh, D. and Hossain, N. (2013). “Field Performance Monitoring and Modeling of Instrumented Pavement on I-35 in McClain County: Phase II,” Annual report. Submitted to Okla. Dept. of Transportation, October, 2013, ??? pages.
  15. Solanki, P., Zaman, M., and Muraleetharan, K. K. (2013). “Field Performance Monitoring and Modeling of Instrumented Pavement on I-35 in McClain County – Phase 1,” Final report, FHWA-OK-13-05, Oklahoma Department of Transportation SPR Item No. 2200, Oklahoma City, Oklahoma, ??? pages.
  16. Hossain, Z. Solanki, P., Zaman, M., and Lewis, S. (2013). “Implementation of MEPDG for Asphalt Pavements with RAP,” Final report, Oklahoma Transportation Center, OTCREOS10.1-45, Oklahoma City, Oklahoma, 158 pages.
  17. Ghabchi, R., Zaman, M., Bulut, R., Koc, M., and Singh, D. (2013). “WMA Pavements in Oklahoma: Moisture Damage and Performance Issues.” Final Report, Oklahoma Transportation Center (OkTC), 159 pages.
  18. Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F. (2013). “Continuous Real-Time Measurement of Pavement Quality during Construction.” Report submitted to Volvo Construction Equipment, Shippensburg, PA, Dec. 2013.
  19. Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F. (2013). “Evaluation of Performance of Asphalt Pavements Constructed using Intelligent Compaction Techniques,” Annual Report. Submitted to ODOT (SP&R Item #2246), Oct. 2013.
  20. Commuri, S., Zaman, M., Beainy, F., Singh, D.V., Nazari, M., Imran, A., and Barman, M. (2013). “Pavement Evaluation Using a Portable Lightweight Deflectometer,” Submitted to Transp. Center, Report No. OTCREOS11.1-14-F, ??? pages.
  21. Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, A., Beainy, F., and Singh, D.V., (2013). “Real-time measurement of quality during the compaction of subgrade soils,” Submitted to Transp. Center, Report No. OTCREOS10.1-11-F, ??? pages.
  22. Beainy, F., Singh, D.V., Commuri, S., Zaman, M. (2013). “New Asphalt Mix Design Program for Oklahoma Department of Transportation (ODOT.” Final report. Submitted to Oklahoma Dept. of Transp., ??? pages.
  23. Hossain, Z., Solanki, P., Zaman, M., Adje, D. and Lewis, S., “Test Methods for Use of Recycled Asphalt Pavement in Asphalt Mixes.” Final report (FHWA-OK-12-01) to ODOT, March 2012, 128 pages.
  24. Hossain, Z., Zaman, M., Doiron, C. and Cross, S., “Development of Flexible Pavement Database for Local Calibration of MEPDG.” Final report (SPR Item 2209) submitted to ODOT, Feb. 2011 (144 pages).
  25. Singh, D., Zaman, M. and White, L., “Modeling 85th Percentile Speed for Rural Highways for Enhanced Safety.” Final report (SPR Item 2211) submitted to ODOT, March 2011 (109 pages).
  26. Pei, J.S., Ibrahim, T. and Zaman, M., “Wireless Sensor Packaging Monitoring for Highway Bridges.” Final report (Project ARO7.2-056) submitted to OCAST, Nov. 2011 (10 pages).
  27. Solanki, P., Zaman, M. and Khalife, R., “Tube Suction Test for Durability Cementitiously Stabilized Soils.” Final report (OTCREOS7.1-52) submitted to OkTC, June 2011 (200 pages).
  28. Solanki, P., Zaman, M. and Khalife, R., “Tube Suction Test for Durability Cementitiously Stabilized Soils.” Final report (SPR Item Number 2215) submitted to ODOT, June 2011 (201 pages).
  29. “Engineering Properties of Stabilized Subgrade Soils for Implementation of the 2002 AASHTO Pavement Design Guide” (P. Solanki, N. Khoury and M. Zaman). Draft final report submitted to Oklahoma Dept. of Transportation, Jan. 2009 (110 pages).
  30. “Maximum Chat Utilization in Asphalt Paving at the Tar Creek Superfund Site – Test Road” (N. Wasiuddin, M. Zaman, R. Nairn, G.A. Miller, S.N. Navaratnarajah, and R. Teredesai). Submitted to ODEQ, April 2008 (288 pages).
  31. “PHASE I Report – ASSISTANCE AGREEMENT DTFH61-08-G-0002” (B. Lemon, S. Commuri and M. Zaman). Submitted to Julie Zirlin, Highways for LIFE Technology Partnerships Program, FHWA, Washington, D.C., Dec. 2007.
  32. “Intelligent Asphalt Compaction Analyzer” (S. Commuri and M. Zaman). Final report submitted to OCAST, 2007 (59 pages).
  33. “Field Correlation of PQI Gauge with Nuclear Density Gauge: Phase: I” (N. Wasiuddin, A.T. Mai, S. Commuri and M. Zaman). Final Report to ODOT, 2007 (27 pages).
  34. “Effect of Anti-Stripping Additives on Performance Graded Binders in Oklahoma” (S. Selvamohan, M. Zaman, J.G. Laguros, N.M. Wasiuddin, B. Quinn, and J.C. Coleman). Final Report Submitted to OTC, Mar. 2007 (108 pages)
  35. ²Effect of Soil Suction and Moisture Content on Resilient Modulus of Subgrade Soils in Oklahoma² (M. Zaman and N. Khoury). Final Report, Item 2167, ORA 125-6662, Oklahoma Department of Transportation, OKC, Oklahoma, February 2007 (58 pages).
  36. “Permeability and Resilient Modulus of Different Aggregate Bases Commonly Used in Oklahoma” (N.N. Khoury and M. Zaman). Draft Final Report submitted to OTC, November 2006 (44 pages).
  37. “Resilient Modulus of Asphalt Concrete and Its Correlations with APA Rut” (S.K. Navaratnarajah, N.N. Khoury and M. Zaman). Draft Final Report submitted to Oklahoma Dept. of Transportation, Nov. 2006 (156 pages).
  38. “Cementitious Stabilization of Raw Chat for Roadway Base Application” (R.A. Teredesai, M. Zaman, G.A. Miller and R.W. Nairn). Final Report submitted to ODEQ, October 2005 (40 pages).
  39. “Evaluation of Surface Free Energy Characteristics of Aggregates and Binders in Hot Mix Asphalt” (N.M. Wasiuddin, C.M. Fogle, M. Zaman and E.A. O’Rear). Final Report submitted to ODOT and OTC, October 2005 (61 pages).
  40. “A Laboratory Study to Optimize the Use of Raw Chat in Hot Mix Asphalt for Pavement Application” (N.M. Wasiuddin, W.B. Hamid, N. Kolothody, C.F. Gause, M. Zaman and R.W. Nairn). Final Project Report submitted to ODEQ, August 2005, 200 pages.
  41. “Effect of Soil Suction and Moisture on Resilient Modulus of Subgrade Soils in Oklahoma” (N.N. Khoury, and M. Zaman). Annual Progress Report submitted to ODOT/OTC, December 2004 (24 pages).
  42. “Evaluation of Surface Free Energy Characteristics of Aggregates and Binders in Hot Mix Asphalt: Phase II, Year 2” (N.M. Wasiuddin, D.C. Howell, M. Zaman and E.A. O’Rear). Annual Progress Report submitted to OTC, December 2004 (54 pages).
  43. “Resilient Modulus Testing and Density Gradient Analysis of Selected Asphalt Mixes” (R.A. Tarefder and M. Zaman). Final Project Report submitted to ODOT, July 2004 (95 pages).
  44. “Durability of Chemically Stabilized Aggregate Bases” (N.N. Khoury, M. Zaman and G.A. Miller). Final Project Report submitted to ODOT, August 2003 (173 pages).
  45. “Evaluation of Surface Free Ebergy Characteristics of Aggregates and Binders in Hot Mix Asphalt: Phase II, Year 1” (N.M. Wasiuddin, H.J. Barraza, M. Zaman and E.A. O’Rear). Annual Progress Report submitted to OTC, October 2003 (60 pages).
  46. “High Performance Pavement from Recycled Materials” (M. Zaman, C.F. Ting, and R. Sisson). Final Project Report submitted to OCAST, September 2003 (176 pages).
  47. “Evaluation of Rutting Potential of Asphalt Mixes Using the Asphalt Pavement Analyzer” (R.A. Tarefder and M. Zaman). Final report submitted to Oklahoma Dept. of Transportation, November 2002 (163 pages).
  48. “An Alternate Method for the Determination of Asphalt Content” (M. Shaheed, R. Tarefder, M. Zaman and Y. Abousleiman). Final report submitted to Oklahoma Transp. Center and Oklahoma Dept. of Transp. , Sept. 2002 (56 pages).
  49. “Evaluation of Surface Free Energy Characteristics of Aggregates and Binders in Hot Mix Asphalt: Phase I” (M. Zaman and N.M. Wasiuddin). Final report submitted to Oklahoma Transp. Center and Oklahoma Dept. of Transp. , Sept. 2002 (82 pages).
  50. “Rock Mechanics Research Center”. (Y. Abousleiman, M. Zaman, et al). Final report submitted to OCAST, Aug. 2001 (55 pgs).
  51. “Nonlinear Analyses for Coupled Fluid/Rock Interaction” (Y. Abousleiman, M. Zaman, T.E. Scott and J.-C. Roegiers). Final report submitted to OCAST, Feb. 2001 (47 pgs).
  52. “Mix Design Using Asphalt Millings” (R. Issa, M. Zaman, and G.A. Miller). Summary Rep. to ODOT, Aug. 2000 ( 36 pgs).
  53. “Pavement Rehabilitation Using Asphalt Millings” (R. Issa, M. Zaman and G.A. Miller). Project Report submitted to Koch Materials Co, January. 2000( 109 pgs).
  54. “Laboratory and Field Evaluation of Soil Stabilization Using Cement Kiln Dust” (G.A. Miller, M. Zaman, J. Rahman and N.K. Tan). Final report submitted Oklahoma Dept. of Transportation, Feb. 1999.
  55. “Modeling the 85th Percentile Speed on Oklahoma Two-Lane Rural Highways: A Neural Network Approach” (R. Issa, M. Zaman and Y.M. Najjar). Final report submitted Oklahoma Dept. of Transportation, Dec. 1998 (36 pages text).
  56. “Resilient Modulus of Raw and Stabilized Aggregate Bases and Evaluation of Layer Coefficients for AASHTO Flexible Pavement Design,” Vol. IV: Meridian Aggregate Stabilized with Cement-Kiln-Dust (J.-H. Zhu, M. Zaman and J.G. Laguros). Final report submitted to Oklahoma Dept. of Transportation, Aug. 1998 (104 pgs.).
  57. “Resilient Modulus of Raw and Stabilized Aggregate Bases and Evaluation of Layer Coefficients for AASHTO Flexible Pavement Design,” Vol. III: Meridian Aggregate Stabilized with Fly Ash and Fluidized Bed Ash (K. Pandey, M. Zaman and J.G. Laguros). Final report submitted to Oklahoma Dept. of Transportation, Aug. 1998 (96 pgs.).
  58. “Resilient Modulus of Raw and Stabilized Aggregate Bases and Evaluation of Layer Coefficients for AASHTO Flexible Pavement Design,” Vol. II: Richard Spur and Sawyer Aggregates (P. Tian, M. Zaman, and J.G. Laguros). Final report submitted to Oklahoma Dept. of Transportation, Aug. 1998 (231 pgs.).
  59. “Resilient Modulus of Raw and Stabilized Aggregate Bases and Evaluation of Layer Coefficients for AASHTO Flexible Pavement Design,” Vol. I: Final Summary Report (M. Zaman, J.G. Laguros, P. Tian, J.-H. Zhu, K. Pandey). Final report submitted to Oklahoma Dept. of Transportation, Aug. 1998 (96 pgs.).
  60. “Laboratory Investigation of Soft Railroad Subgrade Soil Behavior Under Repeated Load Applications” (G.A. Miller, M. Zaman, and S.Y. Teh). Final report submitted to Trans. Tech. Center, Assoc. Of American Railroads, Oct. 1997 (59 pages).
  61. “Impact of Loaded Trucks on Transportation Infrastructure Deterioration” (Z. Hossain, A.N.M. Ahsanuzzaman, C.T. Bong, M. Zaman, and M. Mooney). Final report submitted to Oklahoma Dept. Of Transportation, Jan. 1997 (105 pgs.).
  62. “Experimental Study of the Effects of Reinforcing Steel Arrangement in CRCP” (A. Soltani, M. Zaman, and L. Ring). Final report submitted to Concrete Reinforcing Steel Inst., June 1996 (205 pgs.).
  63. “Field Evaluation of Drainable Bases in Oklahoma” (M. Rahman, T. Curtis, and M. Zaman; in collaboration with D.A. Ooten, K.K. Muraleetharan, and J.G. Laguros). Submitted to ODOT, May 1996 (232 pgs.).
  64. “Effect of Fluid Hydraulics on Petroleum Rock Behavior” (A.R. Kukreti, M. Zaman, and F. Civan). Final Report (Proj. AR2-084) to OCAST, Aug. 1995 (360 pgs.).
  65. “Statistical Models for Identification of Problematic Bridge Sites and Estimation of Approach Settlements” (M. Zaman, J.G. Laguros, and R.K. Jha). Submitted to Okla. Dept. of Transp., May 1995 (110 pgs.).
  66. “FEABAS – A User-Friendly Software for Prediction of Bridge Approach Settlement” (M. Zaman, J. Laguros, H. Chen and M. Rahman). Submitted to Okla. Dept. of Transp., May 1995, (217 pgs.).
  67. “Rock Mechanics Research Center” (J.-C. Roegiers, M. Zaman, et. al.). Third year Annual Rep./Renewal Submitted to National Science Foundation, April 1995, (296 pgs.)
  68. “Cooling Properties of Asphalt Surfaces” (D. Chen, M. Zaman and J.G. Laguros). Final Report to ODOT, October 1994 (61 pgs.).
  69. “Annual Report: An Expert System for Reservoir Completion and Stimulation” (M. Kanj, M. Zaman and J.-C. Roegiers). Submitted to OCAST, Sept. 1994.
  70. “Resilient Moduli of Aggregates for Improved Pavement Design” (D.H. Chen, L. Yi, M. Zaman and J.G. Laguros). Final Report submitted to OCAST, December 1994 (290 pgs.).
  71. “Study of Pore Collapse Problems in Oil Reservoir Rocks” (A. Abdulraheem, M. Azeemuddin, S. Mowar, M. Zaman, and J.-C. Roegiers). Final Report to OCAST, Dec. 1993 (395 pgs.).
  72. “AI-Applications in the Petroleum Industry—A Literature Review” (M. Kanj, M. Zaman and J.-C. Roegiers). Report submitted to OCAST, April 1993 (66 pgs.).
  73. “Workshop on User-Friendly Software for Prediction of Bridge Approach Settlements” (M. Zaman, J.G. Laguros, D. Bhat, C. Hua and K. Pandey). Workshop Handout (ODOT Study #2188), Workshop organized by the Okla. Dept. of Transp., held on July 21, 1993 (79 pgs).
  74. “Effect of Fluid Hydraulics on Petroleum Rock Behavior” (A.R. Kukreti, M. Zaman, F. Civan and S. Singh). Progress Report (Proj. No. AR2-084) submitted to Okla. Center for Advancement of Science and Tech. (OCAST), May 1993 (241 pgs).
  75. “Statistical Models for Identification of Problematic Bridge Sites and Estimation of Approach Settlements” (M. Zaman, J.G. Laguros and R.K. Jha). Res. Rep. submitted to Okla. Dept. of Transp., June 1993 (118 pgs.).
  76. “A User-Friendly Software for Prediction of Bridge Approach Settlements” (M. Zaman, D. Bhat and C. Hua). Res. Rep. submitted to Okla. Dept. of Transp., June 1993 (182 pgs.).
  77. “Resilient Modulus of Select Aggregate Bases and Their Correlations with Other Engineering Properties” (J.G. Laguros, M. Zaman and D.H. Chen). Res. Rep. submitted to Okla. Dept. of Transp., June 1993 (118 pgs.).
  78. “U.S.-Canada Workshop on Recent Accomplishments and Future Trends in Geomech. in 21st. Century” Pre-Workshop Proc. (Edited by M. Zaman, C.S. Desai and A.P.S. Selvadurai), held at Norman, Okla., Oct. 21-23, 1992 (387 pgs.).
  79. “Dynamic Response of Rigid Airport Pavements Subjected to Temperature Differentials” (M.R. Taheri, M. Zaman and V. Khanna). Res. Rep. to the Engineering Foundation (Grant RS-A-90-3).
  80. “A High Capacity (30,000 psig) Cubical Device: Development and Performance Evaluation” (M. Zaman, A.R. Kukreti and D.K. Mishra). Res. Rep. to National Science Foundation (Grant #MSM-8705972), Dec. 1991 (325 pgs).
  81. “Constitutive Modeling of Geological Formations Considering Porosity and Permeability Alterations Due to Fluid Withdrawal” (A.R. Kukreti, M. Zaman and F. Civan). Proj. Report for Grant No. G1104140, submitted to the U.S. Dept. of Interior, Bureau of Mines, Washington, D.C., July 1991, (50 pages).
  82. “Expert Systems Applications for ODOT” (J.G. Laguros, G. Bozai, M. Zaman, A. Mangaokar, J.F. Harp and J.L. Gattis). Final Rep. to ODOT, July 1991 (49 pgs).
  83. “Assessment of Resilient Modulus Testing Methods and Their Application to Design of Pavements” (R. Danayak, M. Zaman, J.G. Laguros). Final Rep. to ODOT, June 1991 (87 pgs).
  84. “Evaluation of Causes of Excessive Settlements of Pavements Behind Bridge Abutments and Their Remedies: Phase III” (J.G. Laguros, M. Zaman, A. Alvappillai and K. Vavarapis). Res. Rep. to ODOT, June 1991, (216 pgs).
  85. “Pore Collapse in Reservoir Rocks: A Critical Review” (A. Mohammed, M. Zaman and J.C. Roegiers). Int. Rep. CEES and PG & E., Univ. of Oklahoma, Nov. 1990 (40 pgs).
  86. “Three -Dimensional Testing and Constitutive Modeling of an Oklahoma Coal for Effective Mine System Design and Ground Control” (with Y.M. Najjar and A.R. Kukreti). Submitted to Oklahoma Mining and Mineral Resources Research Institute, University of Oklahoma, July 1990.
  87. “Evaluation of Causes of Excessive Settlements of Pavements Behind Bridge Abutments and Their Remedies: Phase II” (with J.G. Laguros and I.U. Mahmood). Res. Rep. to Research Division, Oklahoma Department of Transportation, January 1990 (199 pgs).
  88. “Stability Analysis and Characterization of Ground Subsidence of Abandoned Lead-Zinc Mines in Northeastern Oklahoma (with J.L. Ahern). Final Report to Oklahoma Mining and Mineral Resources Research Institute, University of Oklahoma, July 1988, (73 pgs).
  89. “Development of a Constitutive Model for Predicting Yielding and Failure Behavior of Rocks Under Three-Dimensional Loading” (with A.R. Kukreti and Y.M. Najjar). Final Report to the Energy Resources Institute, University of Oklahoma, Aug. 1988, (99 pgs).
  90. “Ground Subsidence in Oklahoma Due to Mining: Potential, Problems and Numerical Modeling” (with Y.M. Najjar and N. Koragappa). Research Report to Oklahoma Mining and Mineral Resources Research Institute, University of Oklahoma, 1987.
  91. “Evaluation of Causes of Excessive Settlements of Pavement Behind Bridge Abutments and Their Remedies – Phase I” (with J.G. Laguros and I.U. Mahmood). Submitted to the Research Division, Oklahoma Department of Transportation, January 1986.
  92. “Modeling of Flow of Immiscible Fluids in Heterogeneous Irregular Shaped Reservoirs for Efficient Oil Recovery” (A.R. Kukreti and F. Civan). Submitted to the Energy Resources Institute, University of Oklahoma, 1985.
  93. “Influence of Interface Behavior in Dynamic Soil-Structure Interaction Problems” (with C.S. Desai). Report to National Science Foundation, University of Arizona, Tucson, 1982.
  94. “Finite Element Analysis of Interaction Between an Elastic Circular Plate and Isotropic Elastic Half Space.” M. Eng. Thesis, Carleton University, Ottawa, Canada, 1979.
  95. “The Evaluation of Polluting Effects of Tannery Waste on Natural Water Resources of Bangladesh and Its Treatment” (Research report, with A.F. Ahmed and M.N. Islam). Submitted to the Univ. Grants Commission, Bangladesh, 1976.
Pavement Materials and Systems Group
202 W. Boyd St., Room 334
Norman, OK 73019-1024
Updated 3/13/2018 by Pavement Materials and Systems Group: zaman@ou.edu